Desperate! No QLED, no post

[fitch2020]

Hey guys, 

I really need your help. I really don't know what to do at this point.

The components (at this point) are:

- ASUS STRIX B650E-I

- Kingston Fury 2x16 GB DDR5-6000

- 7800x3D

The problem: The fan spins, but nothing else happens. No beep, no lights on the QLED. None, not even without the CPU...I updated the BIOS without the CPU, so the MB seems fine... but I am completely lost, what the problem could be. 

Very open to help 🙂
Fitchie

[Silent_Scone]

Hey Fitch,

Is this directly after building the system or something that's happened suddenly? None of the QLED indicators are lit at all? 

- Q-LED (CPU [red], DRAM [yellow], VGA [white], Boot Device [yellow green])

[fitch2020]

Yes, directly after build and yes, none of the QLED-lights lite up.

[Silent_Scone]

Confirm that the ATX 12V and 24 Pin connector are fully inserted? (Highlighted below)

Check the CPU socket for any pin damage, then reattach CPU and cooler whilst checking for even mounting pressure.

[fitch2020]

Checked it, still the same...

[Silent_Scone]

Not good! As you conducted a BIOS update successfully, suspect CPU. I'd contact the etailer as first port of call.