11-08-2022
09:54 PM
- last edited on
03-06-2024
10:08 PM
by
ROGBot
11-09-2022 11:13 AM
Rob Ainscough wrote:
My plan was to put my 4090 in PCIEX16_1 to run X16.
But the manual seems to suggest if I install an M.2_1 or M.2_2 or Gen-Z.2 I'll but stuck with PCIEX16_1 at 8X and my M.2's at 4X?
Puzzled at what configuration I should be using ... should I put my two Samsung 980 Pro 2TB 2280 M.2's in the single Gen-Z.2 module or put them in the M2_1 and M2_2 slots on the motherboard?
Thoughts?
Cheers, Rob.
11-09-2022 02:46 PM
11-10-2022 03:13 AM
11-10-2022 03:10 PM
Rob Ainscough wrote:
My plan was to put my 4090 in PCIEX16_1 to run X16.
But the manual seems to suggest if I install an M.2_1 or M.2_2 or Gen-Z.2 I'll but stuck with PCIEX16_1 at 8X and my M.2's at 4X?
Puzzled at what configuration I should be using ... should I put my two Samsung 980 Pro 2TB 2280 M.2's in the single Gen-Z.2 module or put them in the M2_1 and M2_2 slots on the motherboard?
Thoughts?
Cheers, Rob.
11-10-2022 10:13 PM
11-14-2022 05:43 PM
Rob Ainscough wrote:
Hi Max,
Thanks for the response, so my best performance setup is:
4090 (or 7900XTX when released) in PCIEX16_1
#1 M.2 SamSung 980 Pro 2TB in M.2_1 (on motherboard)
#2 M.2 SamSung 980 Pro 2TB in GEN-Z.2_1 (front or rear, not sure your reference point for Left/Right?)
Will that keep PCIEX16_1 at X16?
Cheers, Rob.
11-11-2022 02:32 PM
11-14-2022 09:13 PM
11-15-2022 11:13 AM