I updated to 0922 to get ready for the x3d CPUs but now if I try to re-enable AMD Expo it will almost always POST into BIOS safe mode and ask to press F1 to setup or get stuck on memory testing. I reset BIOS to default and did the update like every other time I've done it on this board. I've been using this memory for months on all the other BIOS firmware updates without issues and haven't touched it, just updated the BIOS. Is this a known issue with a fix incoming?
EDIT: Turning on EXPO is the ONLY change from default BIOS.
EDIT 2: I tried setting Memory Context Restore to off, it got past POST once and then the issue came back, windows seemed perfectly stable when it got that far.
I know that was for Olli2k but I wanted to note that I have tried setting SOC to 1.25v which was the 0805 stable voltage according to HWinfo and the highest I felt comfortable setting SOC. MB didn't POST once EXPO was re-enabled after I booted once non EXPO to check voltages in HWinfo.
Just to keep you up to date: After changing CPU to 7950x3d I'm in a total mess. Every cold boot fails. No matter if it is DOCP I, DOCP II or auto. I need to enter bios every time, change any RAM setting and save. Then system boots with all of these options. System is booting every time after leaving bios without saving with standard RAM settings. I had several blue screens as well... Had no problems on my 7600x.