I can't get work my all 4x DDR5 memory slots with EXPO setting. I have 4 x 32 gb (G.Skill Trident Z5 Neo, DDR5-6000, CL30-40-40-96, 1,40v). I can start my computer with 2 x 32 gb with EXPO on, but when I add rest off my memory, computer won't start. ...
Has anyone seen this before?Looks like by VDDCR_VDD, VDDR_SOC and VDD_MISC are being reported at 2x the set values? (Asus Strix B650e-f with latest bios) UCLK and FCLK also looked to be doubled.Is this an error with HWInfo or is there some bios issue...
I've got a USB2 bracket hooked up to two of the USB port headers on this board, and have an intermittent fault, usually happens on first boot if the PC has been off for a while, and a reboot makes it go away. The problem is one of the USB hubs (the o...
I discovered that Asustek motherboards can still damage the processor's SoC or at least cause instabilities and also make overclocking difficult. Precisely the overclocking options available, for some reason, may be sending excessive voltage and curr...
Hello, I would like to gets working Asus Hyper m.2 x16 gen4 card with MB Asus Strix x670e-f. I have Radeon 6750 XT GPU (pciex16_1) and 4pcs of M2 nvme ssd (2TB), 64GB RAM.First M2 (with installed operation system) is directly installed in the first M...
I was stable on the previous non-beta BIOS release with EXPO @ 6000 and it was impossible to make the system stable with the latest BIOS based on AGESA 1.0.0.7a. This BIOS introduced a massively faster memory training procedure that cut boot time by...
Hi Guys My 7800x3d doesnt boost higher then 4.4 under full load but no load/light load(50%) it goes to 4.7GHZ its around 82-83C max but my 7800x3d doesnt boost higher then 4.4ghz(under full load) can somebody help me out?SPECSCPUAMD Ryzen 7 7800X3DRA...
I'm losing my mind about this. I had it show up a couple of times, but I couldn't reproduce it. I have no idea how to set up the BIOS so that Blackmagic Design Decklink Mini Monitor 4K is being detected everytime. I'm on BIOS 1415, since 1602 doe...
Just updated to Bios 1602 on my Crosshair X670E Extreme, Completely stuffed my system, cannot set any Expo profiles. if so have lockups freezers within bios, and blue screen into windows. bootable only with auto option. Anyone else with this issue?
Hi I did quite some changes to my BIOS settings (fan curves, turned of unneeded hardware like bluetooth, RAM/CPU settings, ...) and saved it as a profile. Now I heard: sometimes it is not recommended to load an old profile on a new/updated BIOS versi...
