cancel
Showing results for 
Search instead for 
Did you mean: 

At POST orange DRAM Led ASUS ROG STRIX X670E-F

CrUzEr90
Level 8

Hi,

I build a PC and from the beginning every time I start my PC, I get a orange DRAM led at POST for +-50 sec. after that the PC boots and I'm not having any problems. What have I done so far:

- Updated Bios to latest version (1905)
- Set up EXPO I and Dram timing
- Ram is in correct slots A2 and B2
- Tested with one ram stick, swapped them from slots

I had no result so far. I hope someone here can help. Maybe I forgot a bios setting ?

Specs:

 
Mobo: ASUS ROG STRIX X670E-F
CPU: AMD Ryzen 7 7800X3D
Ram: G.Skill 64 GB (2x32GB) DDR5-6000 CL32-38-38-96 (F5-6000J3238G32GX2-TZ5NR)
GPU: Gigabyte RTX 3080 GAMING OC 10G (rev. 1.0)
 
This is what happens:
https://streamable.com/awmy7l
 
Bios/Ai Tweaker Photo's :
20240308_182747.jpg20240308_182807.jpg20240308_182825.jpg20240308_182902.jpg20240308_182922.jpg20240308_183005.jpg20240308_183014.jpg20240308_183058.jpg
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
700 Views
1 ACCEPTED SOLUTION

Accepted Solutions

Nate152
Moderator

Hello CrUzEr90

The long boot time is likely due to memory training.

If your pc is stable with EXPO enabled, try enabling Memory Context Restore. This setting is found in the bios, AI Tweaker, Dram Timing Control.

Does this speed up boot time?

 

 

 

 

 

View solution in original post

7 REPLIES 7

Nate152
Moderator

Hello CrUzEr90

The long boot time is likely due to memory training.

If your pc is stable with EXPO enabled, try enabling Memory Context Restore. This setting is found in the bios, AI Tweaker, Dram Timing Control.

Does this speed up boot time?

 

 

 

 

 

Hey thanks for helping but I enabled Memory Context Restore, but problem stays the same doesn't speed up the boot time.

 

Nate152
Moderator

If you just enabled Memory Context Restore for the first time, try rebooting.

Boot time should be faster.

 

 

 

 

I checked again, but now I did a shutdown instead of a restart my bad. but now the boot is faster, Thank you 😁.

When I look at my Ram speed in CMD and in CPU-Z it is diffrent
I think there is still a problem or is there an explanation for this ?
Ram speed.png

Nate152
Moderator

Good to hear boot time is faster !

CPU-Z is showing your memory is running at 6000MHz. DDR stands for double data rate so you double what CPU-Z is showing which is 6000MHz. It's showing slightly lower because of BCLK fluctuation.

You can also check windows task manager, it shows the actual speed of your memory.

memory speed.png

Yeah, and there it is 6000 MHz so I think all is ok 😁.
Thanks for the help 😊

Screenshot 2024-03-09 143129.png

Nate152
Moderator