08-13-2023 04:58 AM
Hello my newly built is stuck on memory reading at the first boot. I am using G.skill Trident z5 RGB F5-6400J3239G32GX2-TZ5RK
(DDR5 - 6400 CL32 - 39 - 39 -102) Intel XMP 3.0 Ready.
AMD Ryzen 9 7950X.
Asus Rog Strix Crosshero x670e Extreme.
Asus Tuf OC 4090 GPU.
Anyone can help in this matter? Thank You.
08-13-2023 06:52 AM - edited 08-13-2023 06:52 AM
Hello,
That's an Intel memory kit. It's neither on the G.SKILL or ASUS QVL. 6400MT 1:1 can be challenging for some AM5 CPUs to achieve. My advice would be to return the memory kit and purchase a validated kit on the Qualified Vendor List
https://rog.asus.com/motherboards/rog-crosshair/rog-crosshair-x670e-hero-model/helpdesk_qvl_memory/.
08-14-2023 04:23 AM
Thanks for the reply.
Tried with other compatible DIMMS, but it didn't work out. Checked the MB with other processors but no luck. Sent the MB to Asus support.
08-14-2023 04:29 AM
If the system was not POST'ing after a clear CMOS then potentially a fault, yes. Did you make note of what Q-CODE the board was stopping on?
08-15-2023 08:32 AM
It was stopping on code00.