ASUS Rog Crosshair X670E Hero issues recognising additional NVME drive

[Seldarin]

Hi, 

I have recently setup a new desktop using Raid 0, with an addition Gen 4 NVME drive for extra software to keep it separate from the OS drive, which is Raid 0, with 2 x Gen 5 NVME drives. 

When i have installed Win 11, the additional drive doesnt show up. Is there something that i need to set in the bios in order for this to show up? The BIOS is far from user friendly and i am surprised that i managed to get it setup for Raid 0 in the first place. 

System i am running is:

MB - ASUS Rog Crosshair X670E Hero

CPU - AMD Ryzen 7 7800X3D

Drives - 2 x 1TB Crucial T700 M.2 2280 NVME PCIe 5.0 and 1 x 4TB Crucial P3 Plus M.2 2280 NVMe PCIe 4.0

Memory - Gskill Trident Z5 Neo  RGB Black 64GB

GPU - Sapphire Nitro+ Radeon RX - 7900 XTX Vapor-X 24GB

AIO Cooler - Lian Li Galahad II LCD-SL INF 360 ARGB

Cooling - Lian Li Uni TL LCD Reverse Blade x 3, Lian Li Uni TL Reverse Blade x 4, Lian Li Uni TL x 3

PSU - Thermaltake Toughpower PF3 1050W Platinum Power Supply 80 Plus Platinum

Case - Lian Li RGB ATX Mid Tower

OS - Window 11 Pro

That about covers it, just stuck with the additional drive and I am clearly overlooking something

[dillipxp]

raid 0 will show only one drive if you want to see both drives, change to ahci in bios

[Seldarin]

I may not have been clear on what i was talking about. I am aware that Raid 0 will only show one drive, but if you read my specs, that is covered by 2 x Crucial 1 TB drives. I have an additional 4TB drive, that is not being recognised. Raid 0 should not prevent that additional drive from showing, otherwise there would be no point in having additional drives

[Seldarin]

I am guessing that no one else has come across this.