Hey Shimano, anyword on a new BIOS for the C6H??
7501 has been a very weird one, specifically, if I reboot my system, the POST is glitched, where i can have a stable system, reboot, and then i'll be unstable.
The only way I've found that consistently works, stability wise for me, is to never restart the system, only shut down, and when i shut down, leave it off for a long while before turning it back on.
Something is wrong when the system is POSTing, not to mention it occasionally will startup, power down then startup again. Hope this gets fixed soon!!!
Currently running a 3600 with corsair vengeance RGB 3200MHz RAM. I've also had to set voltages to fix stability, forcing an upvolt of 1.025v on SOC and .900v on VDDG and VDDP are necessary for me to get less glitching in windows.
At first I thought it was RAM timings but it isn't, I've tried 3200MHz with different timings (and very high RAM voltages) and 2133MHz JEDEC standard speeds and both have identical behaviours when rebooting during a POST.
FYI, for anyone that has this issue, you can try shutting down your rig, turning off the power switch to your PSU, and pushing the power button until all the power is out of the system. Then start the system up, this seems to be more reliable than rebooting, but not always.
It could be my board too, I've got the rev 1.0 of this board, and another friend of mine with the exact same board and revision, had his Crosshair VI Hero's intel NIC completely die. So not sure if 1.0 boards are less reliable than say 1.03 and beyond.
