C7H has very best implementation of VRM temperature reporting. As actual mosfets have temperature sensor. I do not use Fan Xpert, but HWINFO for sure shows VRM temps.
I placed a Thermistor on the VRM heat sink and can read those temps in the BIOS now.
Question on adding multiple temperature sources for fan control.
Does the order of sources matter, or does the system always go by the source with the highest temperature?
If you're using FanXpert you can assign a weight value to the sources for priority - the little slider bars to the right. You get a total of 100 - you can set for an example, 60 to one source and 25 to another and 15 to the other etc etc . I don't think you are able to do that from bios Qfan control.
Ok thanks, but I find AI Suite III too buggy and prefer to configure fan settings in BIOS.