I used a same setup as yours. If you do not mind, can you share with me on the OC setup? I am not that good in OC things but would like to gain a knowledge on it. Hope I can learn it from your setting to begin with.
No problem, here you go:
The Voltage Offset for the Vcore is a negative one, so maybe you need to reduce it!
For the DRAM Timings you maybe should concentrate on the upper primary ones first, I just setted all to reduce training time 😉
i Used P-State overclocking just set the Hex value 9C for 3900MHZ --> p-state oc cause it doesnt deactivate the enegry saving stepping and so on.
For me that is the sweet spot out of performacne, voltage and heat. Bios shows 51C, Ryzen Master 25C. I use a Kraken x62 as CPU cooler.
I hope it helps you, cheers.