Silent Scone@ROG wrote:
5000 series chips with the right memory modules should be able to hit 1900FCLK and possibly higher. You may need to try as much as 1.15v VSOC depending on the CPU sample.
Have not experienced any idle instablity or boost issues on the 5950X personally.
I tried some b-die memory and all the bioses (2311/2402/2502) are giving me the same result,
after bios flash/bios clear/load defaults, it appear stable for first few reboots/hours, DOCP works fine, some mild mem OC/memory timing also works fine.
then ill get a reboot in windows and fails to boot back to windows with same memory settings going back to stock DOCP will not boot, only very relaxed timins (auto 22-22-22-52) at 3200 or slower will post again to windows
reflashing the bios/bios clear/load defaults and machine is back to normal, I can enable DOCP and even oc again
to me it looks like some (hidden?) setting is set to some incorrect value or these new bios'es are very immature
CPU SOC voltage on auto sometimes sets to 0.98V, sometimes ~1.08V and seen it set to ~1.15
Memory im testing is
Corsair CMK16GX4M2Z3600C18 (4x8, also tried 2x8) Micron E-die
T-force TDPPD432G3600HC16GDC01 (2x16GB) Samsung B-die
same results with both
Ohhh boy, built my a new computer, last one was 6 years ago. Previous one was ASUS ROG Hero flavor too, but intel.
It seems I have some serious reading to do about manually fiddling with the RAM. I cannot get the ram to run @ sold as / advertised PC3600 without taking a dump.
Spent the first day fiddling with BSOD and issues with the damned Corsair Commander pros constantly disconnecting from USB....
I had it run for 12hr @ 3533, the next morning it was not having it.
Am running DOCP on
Manually running it @ 3200 (CL18 inherited from DOCP)
DRAM v 1.35
SOC 1.09
I tried a bunch of stuff from other forums etc and ..... I just wanted to play 2077 after waiting for my 5900X, 10 days late from USPS.
I do want to figure out a solution so I can run the ram @ 3600Mhz......
Build:
5900X
Asus ROG Crossfire VIII x570, on 3003 bios, tried with 2702.
CORSAIR Vengeance RGB Pro 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Intel XMP 2.0 Desktop Memory Model CMW32GX4M4D3600C18
Unicorn barf.
Rest of build: https://pcpartpicker.com/list/hnpgz7
Push-pull AIO for now, until I do more homework on watercooling hardline loops...
It seems I have some serious reading to do about manually fiddling with the RAM. I cannot get the ram to run @ sold as / advertised PC3600 without taking a dump.
Spent the first day fiddling with BSOD and issues with the damned Corsair Commander pros constantly disconnecting from USB....
I had it run for 12hr @ 3533, the next morning it was not having it.
Am running DOCP on
Manually running it @ 3200 (CL18 inherited from DOCP)
DRAM v 1.35
SOC 1.09
I tried a bunch of stuff from other forums etc and ..... I just wanted to play 2077 after waiting for my 5900X, 10 days late from USPS.
I do want to figure out a solution so I can run the ram @ 3600Mhz......
Build:
5900X
Asus ROG Crossfire VIII x570, on 3003 bios, tried with 2702.
CORSAIR Vengeance RGB Pro 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Intel XMP 2.0 Desktop Memory Model CMW32GX4M4D3600C18
Unicorn barf.
Rest of build: https://pcpartpicker.com/list/hnpgz7
Push-pull AIO for now, until I do more homework on watercooling hardline loops...
