cancel
Showing results for 
Search instead for 
Did you mean: 

Rog strix b550-e gaming

Raven41
Level 9
new bios 1202
https://www.asus.com/us/Motherboards/ROG-STRIX-B550-E-GAMING/HelpDesk_Download/

ROG STRIX B550-E GAMING BIOS 1202
1. Updated AMD AM4 AGESA V2 PI 1.1.0.0 Patch B
2. Improve system performance and stability
3. Improved DRAM compatibility
138,037 Views
322 REPLIES 322

Problem with peripherals (usb) and ray tracing.
Hello! Has anyone else encountered the problem that if ray tracing is enabled, then the usb peripherals in the game are disabled?
And I have a peripheral shutdown only if ray tracing is enabled, I checked everything in the drain, the same thing, can anyone else come across this?
There were also random shutdowns of the periphery when offsetting (-0.0750) to the processor, but now I have removed it and so far there have not been any.
I’ll add a little more that not all USB ports are disabled, only the front and top 4 ports, the rear USB 3.0 ports are not disabled.
P.S: It came to turning off bluetooth and Asus aura.
I use this hardware:
Case: Aerocool Tor Pro
Case Fan: Aerocool Edge 14 PRO x7
PSU: Toughpower GF1 ARGB 750W Gold - TT Premium Edition [PS-TPD-0750F3FAGx-1]
Motherboard: Asus ROG Strix B550-E Gaming Wi-Fi (Bios 2423)
Craphic card: Palit GeForce RTX 3070 Ti GameRock Drv512.95 0.900v 1935mhz
CPU: AMD Ryzen 7 3700X BOX 3,6/4,4GHz AMD Wraith Prism.
Water cooling: Gamer Storm CASTLE 240 RGB V2
DRAM: Kingston HyperX FURY Black 8x2 Hynix CJR.Rank one.3000 16-17-17-17-36
Hard Drives:
M.2 WD Black SN750 250 GB SSD [WDS250G3X0C-00SJG0]
M.2 WD Blue 250 GB SSD [WDS250G2B0B]
SSD WD Blue 500 GB [WDS500G2B0A]
HDD 1 TB Western Digital Blue [WD10EZEX]
HDD 2 TB Seagate BarraCuda [ST2000DM008]
Monitor: AOC 27" 27G2U5/BK
Headset:
Razer Kraken V3 Hypersense
Mouse:
Razer Basilisk Ultimate & Charging Dock
Keyboard:
Razer BlackWidow Chroma V2 Yellow Switch
Mouse Pad:
Razer Firefly V2

mahd_mahn
Level 7
Can anyone else access the support page to download drivers? Mine flashes on the page and then redirects to the product page with no way to get to bios or driver downloads. I have tried edge as well, different mobo models as well as logging in through my account and clicking on my registered product driver downloads. They all immediately redirect to the product page lol.

mahd_mahn wrote:
Can anyone else access the support page to download drivers? Mine flashes on the page and then redirects to the product page with no way to get to bios or driver downloads. I have tried edge as well, different mobo models as well as logging in through my account and clicking on my registered product driver downloads. They all immediately redirect to the product page lol.


You'll find it here : https://www.asus.com/au/supportonly/ROG%20STRIX%20B550-E%20GAMING/HelpDesk_Download/
Main PC : Asus C8HW / AMD Ryzen 9 3900x / 32 Go 3000 Mhz C15 Corsair Vengeance RGB / nVidia RTX 3090 FE / Sabrent Rocket 4.0 500G / Noctua NH-D15S Chromax.Black / Lian-li O11 Dynamic XL RoG Certified / Corsair AX1500i
Secondary PC : Asus R5E / Intel i7 5930K / 16 Go 2800 Mhz C16 G.Skill Ripjaws 4 / Asus GTX 980 Poseidon / Samsung 850 Pro 256G / XSPC W/C / Cooler Master Cosmos 2 / FSP Hydro G Pro 850

Hi guys,

I'm having new POST issues with 2803 that I was not encountering previously on 2423. I did not have a single problem on 2423 but upgraded to 2803 as recommended with Windows 11. I was able to adjust my timings down from DOCP of 3600CL18 to 3600CL16 with no issues on 2423. That same stable configuration fails to POST on 2803.

I have settled with using DOCP (XMP/AMP) for the time being, but have encountered another issue. As long as my RAM is set to any profile other than stock / auto, it will fail to POST on a fresh power on. This includes warm(?) boot (shutting down windows and leaving it for a few minutes). Restarts work fine. The Q-CODE shows 01 and the DRAM LED stays on. If I hard shutdown by pressing and holding the power button in this state and turn it back on immediately, it will boot fine. Note that this is a different code to the other boot issues everyone is experiencing of "0D". This never happened on 2423.

I have tried resetting CMOS to no success. I tried slightly increasing DRAM voltage to no success (within recommended limits for my memory). Does anyone have any suggestions? Has anyone else encountered this issue?

Thanks all.

RevenentWing wrote:
Hi guys,

I'm having new POST issues with 2803 that I was not encountering previously on 2423. I did not have a single problem on 2423 but upgraded to 2803 as recommended with Windows 11. I was able to adjust my timings down from DOCP of 3600CL18 to 3600CL16 with no issues on 2423. That same stable configuration fails to POST on 2803.

I have settled with using DOCP (XMP/AMP) for the time being, but have encountered another issue. As long as my RAM is set to any profile other than stock / auto, it will fail to POST on a fresh power on. This includes warm(?) boot (shutting down windows and leaving it for a few minutes). Restarts work fine. The Q-CODE shows 01 and the DRAM LED stays on. If I hard shutdown by pressing and holding the power button in this state and turn it back on immediately, it will boot fine. Note that this is a different code to the other boot issues everyone is experiencing of "0D". This never happened on 2423.

I have tried resetting CMOS to no success. I tried slightly increasing DRAM voltage to no success (within recommended limits for my memory). Does anyone have any suggestions? Has anyone else encountered this issue?

Thanks all.

Hi, I'm pretty you sure you have a Ryzen 3000 CPU if that's the case you can't do much about it except going back to 2423. There's an issue with Ryzen 3000 CPU and BIOSes based on AGESA 1.2.0.5 and higher. I have a long Reddit thread about it here with a lot of feedbacks with different motherboards brands, different RAM brands too... etc
So unless you have a custom BIOS from Asus or AMD sends an official fix to all manufacturers, going back to 2423 is your only solution
Main PC : Asus C8HW / AMD Ryzen 9 3900x / 32 Go 3000 Mhz C15 Corsair Vengeance RGB / nVidia RTX 3090 FE / Sabrent Rocket 4.0 500G / Noctua NH-D15S Chromax.Black / Lian-li O11 Dynamic XL RoG Certified / Corsair AX1500i
Secondary PC : Asus R5E / Intel i7 5930K / 16 Go 2800 Mhz C16 G.Skill Ripjaws 4 / Asus GTX 980 Poseidon / Samsung 850 Pro 256G / XSPC W/C / Cooler Master Cosmos 2 / FSP Hydro G Pro 850

Grog777
Level 7
Hi guys !

Any feedback with the latest bios 2806 ?

mcury
Level 10
I'm using with the B550-F gaming (non-wifi), and no problems to report.
This BIOS version provides the PBO2 option for 5800x3d CPUs (running -30mV all cores and it is stable).

5800x3D - 4x8GB 3200MHz CL-14 (running @ 2933MHz since 4x1R is the supported frequency for this CPU)

mcury wrote:
I'm using with the B550-F gaming (non-wifi), and no problems to report.
This BIOS version provides the PBO2 option for 5800x3d CPUs (running -30mV all cores and it is stable).

5800x3D - 4x8GB 3200MHz CL-14 (running @ 2933MHz since 4x1R is the supported frequency for this CPU)


Ok, thanks bro !

mysticode
Level 7
I can't get any left-channel audio. Using the latest Realtek drivers from the support page. Any ideas?

schm0
Level 10
3301 beta bios available.
Agesa 1.2.0.8
But seems broken?
USB drop out and high chip set temperature (> 60 degree Celsius) in bios.
Well, the red USB ports recover from the dropouts better than the others.

Can someone share their chipset temperature, please ?
//edit
Chipset temperature is back to the usual 50 degree Celsius.
idk, what fixed it...
I had the case laying on the side because had to open it and reset the bios.
Maybe there was a heat build-up....
I also re-applied my led profile....