04-04-2017
07:32 AM
- last edited on
03-05-2024
06:53 PM
by
ROGBot
04-04-2017 06:51 PM
Teramungus wrote:
Hello all,
I received my back-ordered MOBO and put my new computer together but can not get it to POST. I assembled and tried to boot but get Q-code:0d and can not get to BIOS. The MOBO light up RGB and appears to be on; the amber light indicating a problem with DRAM is lit. CPU light is green (ready).
BUILD:
ASUS Crosshair VI
Ryzen 1800X
G.Skill F4-3200C14D-16 (2x8GB)
Samsung 960 Pro.
Asus Strix GTX960 OC 2GB
Corsair CX750M (24-pin and 8-pin; no 4-pin)
Fractal Define R5
Dark Rock Pro 3
I tried the shipped BIOS first: Q-Code: 0d.
I updated to latest BIOS via USB and back button: Q-Code: 0d.
Loosened the back plate to the CPU cooler (removed and re-seated all components): Q-code Od.
Tried to clear the CMOS with button on back: Q-code: Od.
Unplugged the USB 3.0: Q-code: 0d.
Tried all RAM slots and each separately (both RAM bad?): Q-code: 0d (on all combinations).
UPDATE: I went to Best Buy and bought PNY Anarchy 2x8GB 2133 CL15 and tried each of the RAM stick and got the same result as above: Q-code: 0d.
UPDATE 2: Tried both BIOS 0902 and 1002.
Update 3: Purchased PNY Anarchy (2x8) 2133MHz (not QVL) and the result did not change: Q-code: 0d.
UPDATE 4: I removed the original backplate for the new cooler and reused the thermal pad so I disassembled and tried again without the pad and no change: Q-code: 0d.
UPDATE 5: I called ASUS and went through the basic steps above but this time without the video card.... same result: Q-code 0d. They recommended RMA. Returning to Amazon (quicker).
I wont be sending this back until tomorrow or the next (new ones are back-ordered 4 days). So, Any suggestions?
Thanks in advance.
04-04-2017 06:56 PM
11-08-2019 07:02 AM
Demoniacstar wrote:
as i have said in another post.....
maybe i should rename it ?...lol
any way ....boot up ..let it do what it do ......when you get the 0d code ...hit the reset to bios button and immediately press and hold the red start button on motherboard when Qcodes light up release the red start button it will boot to bios
12-15-2019 04:20 AM
Saikamaldoss wrote:
Thanks man. It worked for me. I pressed reset and start together and then it booted up. I had same 0d error and was not booting. **
04-05-2017 03:53 AM
04-05-2017 06:00 AM
Teramungus wrote:
Hello all,
I received my back-ordered MOBO and put my new computer together but can not get it to POST. I assembled and tried to boot but get Q-code:0d and can not get to BIOS. The MOBO light up RGB and appears to be on; the amber light indicating a problem with DRAM is lit. CPU light is green (ready).
BUILD:
ASUS Crosshair VI
Ryzen 1800X
G.Skill F4-3200C14D-16 (2x8GB)
Samsung 960 Pro.
Asus Strix GTX960 OC 2GB
Corsair CX750M (24-pin and 8-pin; no 4-pin)
Fractal Define R5
Dark Rock Pro 3
I tried the shipped BIOS first: Q-Code: 0d.
I updated to latest BIOS via USB and back button: Q-Code: 0d.
Loosened the back plate to the CPU cooler (removed and re-seated all components): Q-code Od.
Tried to clear the CMOS with button on back: Q-code: Od.
Unplugged the USB 3.0: Q-code: 0d.
Tried all RAM slots and each separately (both RAM bad?): Q-code: 0d (on all combinations).
UPDATE: I went to Best Buy and bought PNY Anarchy 2x8GB 2133 CL15 and tried each of the RAM stick and got the same result as above: Q-code: 0d.
UPDATE 2: Tried both BIOS 0902 and 1002.
Update 3: Purchased PNY Anarchy (2x8) 2133MHz (not QVL) and the result did not change: Q-code: 0d.
UPDATE 4: I removed the original backplate for the new cooler and reused the thermal pad so I disassembled and tried again without the pad and no change: Q-code: 0d.
UPDATE 5: I called ASUS and went through the basic steps above but this time without the video card.... same result: Q-code 0d. They recommended RMA. Returning to Amazon (quicker).
I wont be sending this back until tomorrow or the next (new ones are back-ordered 4 days). So, Any suggestions?
Thanks in advance.
04-05-2017 06:35 AM
Teramungus wrote:
Hello all,
I received my back-ordered MOBO and put my new computer together but can not get it to POST. I assembled and tried to boot but get Q-code:0d and can not get to BIOS. The MOBO light up RGB and appears to be on; the amber light indicating a problem with DRAM is lit. CPU light is green (ready).
BUILD:
ASUS Crosshair VI
Ryzen 1800X
G.Skill F4-3200C14D-16 (2x8GB)
Samsung 960 Pro.
Asus Strix GTX960 OC 2GB
Corsair CX750M (24-pin and 8-pin; no 4-pin)
Fractal Define R5
Dark Rock Pro 3
I tried the shipped BIOS first: Q-Code: 0d.
I updated to latest BIOS via USB and back button: Q-Code: 0d.
Loosened the back plate to the CPU cooler (removed and re-seated all components): Q-code Od.
Tried to clear the CMOS with button on back: Q-code: Od.
Unplugged the USB 3.0: Q-code: 0d.
Tried all RAM slots and each separately (both RAM bad?): Q-code: 0d (on all combinations).
UPDATE: I went to Best Buy and bought PNY Anarchy 2x8GB 2133 CL15 and tried each of the RAM stick and got the same result as above: Q-code: 0d.
UPDATE 2: Tried both BIOS 0902 and 1002.
Update 3: Purchased PNY Anarchy (2x8) 2133MHz (not QVL) and the result did not change: Q-code: 0d.
UPDATE 4: I removed the original backplate for the new cooler and reused the thermal pad so I disassembled and tried again without the pad and no change: Q-code: 0d.
UPDATE 5: I called ASUS and went through the basic steps above but this time without the video card.... same result: Q-code 0d. They recommended RMA. Returning to Amazon (quicker).
I wont be sending this back until tomorrow or the next (new ones are back-ordered 4 days). So, Any suggestions?
Thanks in advance.
04-05-2017 11:31 AM
CCarpenter wrote:
Are you using the Display Port on the Graphics Card?
Try it again on a HDMI - Port.
This is what my Error was. It should work on a DVI too.
Have a lot of grey hairs more now - because this Error confuses me. My Computer still wont work on DisplayPort with BIOS1002. But HDMI is doin it for me in the meantime. Im writing on that Machine,..
04-05-2017 04:03 PM
Demoniacstar wrote:
to get a displayport working on your graphics card at boot all you have to do is disable csm completely in bios
and you don't have to disconnect anything when you can't boot ....try what i said ....it works...and works every time for me ....
hit reset to bios and immediately!! press and hold the start button in until you see the q codes light up then let go ...it will always no matter what go to bios on my board when i do this, it even gets passed the dreaded 8 code