Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

post code 8

DavidFpv
Level 7

‎10-15-2019 09:56 PM

Hello,
I built my first computer and have a problem.
I made a OC to my memory for 3200 speed (this is the manufacturer's speed)
And every time I turn on the computer or it takes about a minute to turn on or that code jumps (8)
thus is my setup:
Preview file
99 KB
0 Kudos
23 REPLIES 23

Starrbuck
Level 9

‎10-28-2019 10:51 AM

Yes, any of the three including the green and the two 8-pin ones to the left.
0 Kudos

DavidFpv
Level 7
In response to Starrbuck

‎10-31-2019 05:50 AM

Starrbuck wrote:
Yes, any of the three including the green and the two 8-pin ones to the left.


Thank you
0 Kudos

skellattarr
Level 10

‎06-07-2020 03:02 PM

try pulling your CPU out and check pins and reseat the CPU then check all your power connections and make sure memory is seated ok
amd ryzen 9 3950x
CROSSHAIR Viii hero
Corsair Hydro Series H115i
G.SKILL Trident Z 3200mhz 64gb 4x16 timings 16,18,18,38
asus rog strix gtx 1080
TOSHIBA 3TB hdd 3x a total of 9tb, 10 tb hdd and a 1tb mushkin ssd
corsair axi 1200i 1200 watt psu
thermal take view 71 case
0 Kudos

DavidFpv
Level 7
In response to skellattarr

‎06-23-2020 08:54 PM

skellattarr wrote:
try pulling your CPU out and check pins and reseat the CPU then check all your power connections and make sure memory is seated ok


I've checked before.
Everything was fine.

Today the code 04 also jumped
0 Kudos