post code 8

[DavidFpv]

Hello,
I built my first computer and have a problem.
I made a OC to my memory for 3200 speed (this is the manufacturer's speed)
And every time I turn on the computer or it takes about a minute to turn on or that code jumps (8)
thus is my setup:

[Starrbuck]

Yes, any of the three including the green and the two 8-pin ones to the left.

[DavidFpv]

Starrbuck wrote:
Yes, any of the three including the green and the two 8-pin ones to the left.

Thank you

[skellattarr]

try pulling your CPU out and check pins and reseat the CPU then check all your power connections and make sure memory is seated ok

[DavidFpv]

skellattarr wrote:
try pulling your CPU out and check pins and reseat the CPU then check all your power connections and make sure memory is seated ok

I've checked before.
Everything was fine.

Today the code 04 also jumped

[iwan1262]

 hi. I have similar problem and also when I try flashback BIOS the light flash solid and can't flashback BIOS. I try on 3 different USB drive, convert to mbr, format fat32 and rename bios, nothing change