cancel
Showing results for 
Search instead for 
Did you mean: 

post code 8

DavidFpv
Level 7
Hello,
I built my first computer and have a problem.
I made a OC to my memory for 3200 speed (this is the manufacturer's speed)
And every time I turn on the computer or it takes about a minute to turn on or that code jumps (8)
thus is my setup:
536 Views
24 REPLIES 24

Starrbuck
Level 9
Yes, any of the three including the green and the two 8-pin ones to the left.

Starrbuck wrote:
Yes, any of the three including the green and the two 8-pin ones to the left.


Thank you

skellattarr
Level 10
try pulling your CPU out and check pins and reseat the CPU then check all your power connections and make sure memory is seated ok
amd ryzen 9 3950x
CROSSHAIR Viii hero
Corsair Hydro Series H115i
G.SKILL Trident Z 3200mhz 64gb 4x16 timings 16,18,18,38
asus rog strix gtx 1080
TOSHIBA 3TB hdd 3x a total of 9tb, 10 tb hdd and a 1tb mushkin ssd
corsair axi 1200i 1200 watt psu
thermal take view 71 case

skellattarr wrote:
try pulling your CPU out and check pins and reseat the CPU then check all your power connections and make sure memory is seated ok


I've checked before.
Everything was fine.

Today the code 04 also jumped

iwan1262
Level 7

 hi. I have similar problem and also when I try flashback BIOS the light flash solid and can't flashback BIOS. I try on 3 different USB drive, convert to mbr, format fat32 and rename bios, nothing change