05-30-2017 04:37 AM
05-30-2017 04:50 AM
05-30-2017 04:58 AM
Baskura wrote:
The reason the LED lighting is staying on is because you need to go to Advanced > APM Configuration > ErP Ready > Enable (S4+S5) in your BIOS.
This will allow the motherboard to go into low power mode when turning your system off.
05-30-2017 05:06 AM
hosko wrote:
That mode says it disables the LED lighting. Does that mean only when off?
05-31-2017 09:58 AM
02-12-2023 02:15 AM
Baskura wrote:
Hello,
Your board is fine, so don't panic!
The reason the LED lighting is staying on is because you need to go to Advanced > APM Configuration > ErP Ready > Enable (S4+S5) in your BIOS.
This will allow the motherboard to go into low power mode when turning your system off.
Be warned though, if you're running a CPU/RAM overclock near the limit, your machine may not boot correctly from cold (the board not having voltage), so make sure you save your overclock settings before trying, just in case your board forgets them.
05-31-2017 06:45 PM
03-04-2020 03:14 PM
02-13-2023 10:02 AM
lordinfin8 wrote:
I had the same problem and then just stumbled upon it.
Open armory Crate. Select devices>Select motherboard>shutdown settings turn it OFF! I also found a video on youtube that can show you the way.:D
https://youtu.be/coWDgT4d5NM
I hope this helps.
02-28-2023 09:46 AM
hosko wrote:
I am having issues with my motherboard LEDs not turning off when the board system is Shut Down. I have set the motherboard LEDs and RGB LED headers to static red in Aura and when the system is powered up everything is working correctly. However when the system goes into shutdown the headers turn off but the motherboard LEDs go into rainbow cycle mode. In the UEFI I have set the LEDs to off when the system is off, that doesn't seem to do anything. I have to manually leave all LEDs off in the UEFI because my computer is in the same room as my baby sleeps and my wife isn't keen on the disco mode.
I have read people having issues with Aura not turning on but not with it not turning everything off.
Any ideas?