Components: CPU 1700x CPU Cooler NZXT Kraken62 RAM F4-3200C14Q-32GTZ Motherboard Asus Crosshair Vi Hero WIFI
My current overclocking settings:
BIOS version 1701
CPU overclock p0 state 9D -> 39.25x
Extreme Tweaker CPU Core Voltage = Offset mode CPU Core Voltage Offset Mode Sign = +(plus) - CPU Core VoltageVoltage Offset = 0.03125 CPU SOC Voltage = Offset mode VDDSOC Offset Mode Sign = - (minus) - VDDSOC Voltage Offset = 0.03125 DRAM Voltage = 1.35000 (Default) Extreme Tweaker \ DRAM Timing Control DRAM ... = 14-14-14-14-34-48-6-8-39-Auto(4)-Auto(12)-Auto(24)-Auto(0)-3-3-312-232-142-Auto(14)-8-Auto(6)-Auto(3)-Auto(1)-Auto(7)-Auto(7)-Auto(1)-Auto(5)-Auto(5)-Auto(8) ProcODT_SM = 60 ohm Cmd2T = 1T RttNom = RZQ/7 RttWr = RZQ/3 RttPark = RZQ/1 Extreme Tweaker \ External Digi+ Power Control DRAM VBoot Voltage = 1.35
So overclock is stable. But I have Failed RAM Trainig from cold boot and I hate it.
I tried to set procODT to 68,8 ohm and 80 ohm, still same. 53.3 ohm will not even boot from restart. I tried Vboot to 1.375V and even 1.4V, nothing I tried to change from auto to MemCadBus ClkDrvStren_SM = 30ohm, 30.0 Ohm, 30 ohm
TCWL 14 TRTP 13 (try 😎 TRDWR 6 (try 7) TWRRD 3 TWRWR SC auto TWRWR SD auto TWRWR DD auto TRDRD SC auto TRDRD SD auto TRTDRD DD auto TCKE auto
ProcODT Find a setting where it boots CMD2T 1t is quickest GEAR DOWN Auto (enabled to get started then try disabled when stable) POWER DOWN Auto (enabled to get started then try disabled when stable) The settings below here are individual to each system. Mine are set to these values. RTT NOM RTZ 6 RTT WR RTZ 3 RTT PARK RTZ 1 BUS CLK DRV STREN BUS ADDR CMD DRV STREN CS ODT DRV STREN BUS CKE DRV STREN
The ROG site is being buggy. So I apologise for the formatting issues. Good Luck with the board though.