cancel
Showing results for 
Search instead for 
Did you mean: 

crosshair vii not booting code 02

tanabe
Level 7
Crosshair vii
g skill 3400 sniper x 2xsticks of 8gb
amd 2700x
msi gtx1080 ek seahawk
samsung 970 evo m.2 512gb

My system has been running just great, i swapped into a lian li pc-o11 dynamic case.
The system is water cooled with glass tubing 360 nemesis 360gtr rad.
it ran ok after a 24hr test for water leaks, i ran the system and all was well,i left the system on over night .
in the morning the water level had dropped in the resevoir and had into standby , the system was turned off drained and checked .
now the system will not boot only error code 02
i have cleared cmos , bios reset ,still only error 02
does anyone have any ideas?
234 Views
3 REPLIES 3

ASKnASK
Level 7
Found a thread on reddit with this error code. Turns out it was his PSU cables, one was loose. Check those.

ASKnASK wrote:
Found a thread on reddit with this error code. Turns out it was his PSU cables, one was loose. Check those.


thanks i have tried that

tanabe
Level 7
Fixed i reflashed the bios to any earlier version it booted.
When i update the bios do i update just to the newest version or up date each version one by one?