04-25-2018 07:00 AM
04-25-2018 05:35 PM
04-25-2018 06:00 PM
Curious if anyone else that has this motherboard has experienced random shutdowns on this board. I switched over from the ASRock TaiChi X370, using all the same components but the CPU.
Did not experience any issues on the old board and the temperatures are well within reason.
Running the following setup:
- ASUS Crosshair VII Hero WIFI
- Gskill Trident Z F4-3600C16D-16GTZ (3600 MT/s @ 16-16-16-35-52)
- Ryzen 2700x
- EVGA SuperNova 1000 P2
- Crucial M500
- Soundblaster Z Sound Card
- MSI Geforce 1080 TI ARMOR OC 11g
CPU is Overclocked to 4.2ghz @ 1.4v
The interesting thing is that the machine does not randomly shutdown under stress tests like OCCT or AIDA. It will, however, shut down randomly during gaming or even casual browsing, May shut down once in a session, may not shut down at all, or may shut down two more more times in a session.
When the issue does rear it's head, all of the lights (USB peripherals, ASUS RGB indicators, etc) are on. I have to turn the PSU switch to off to clear the power on the board before I can turn the systen back on.
04-27-2018 04:48 PM
05-06-2018 05:01 AM
05-07-2018 07:49 PM
What about the Corsair Utility Engine software (for keyboards, etc.)? I was running bios 1701 until days ago, when I upgraded to 6004. Now, twice in a week I have had my system in an extended idle (i.e., overnight) and it's supposed to sleep, but won't wake except with the power button. Upgrading the bios is the only thing that's changed...
05-07-2018 07:53 PM
CUE is working fine. It is programme that monitor sensors that are crashing the system out. Usually when you use two at the same time. Try using Corsair link along with Aida64 or HWinfo. There is a half dozen posts regarding this issue on other forums. Asus know about it.
05-07-2018 08:34 PM
Thanks, I think it was 6004. I went to it straight from 1701 (where I had no such problems). Downgrading to 3502 seems to have resolved the issue for the settings I have been using for CPU & RAM OC (i.e., 38.00 cpu multiplier, 3200mhz ram, and Stilt's safe timing settings for 3200 mhz).
05-07-2018 07:05 PM
05-14-2018 11:13 AM