cancel
Showing results for 
Search instead for 
Did you mean: 

Crosshair VI Hero: UEFI build update thread

Raja
Level 13
Directly from Elmor:

Beta BIOS 3008 for C6H/C6HWIFI/C6E:

AGESA 1.0.7.1, temperature offset fixed after S3 resume, GPU Post function fixed, 0d with some GPUs fixed

http://www.mediafire.com/file/f95motjmh211e7h/CROSSHAIR-VI-HERO-ASUS-3008.zip
http://www.mediafire.com/file/ntn6i3jiub610ai/ROG-CROSSHAIR-VI-HERO-WIFI-AC-ASUS-3008.zip
http://www.mediafire.com/file/yj22ld2rmmedp01/ROG-CROSSHAIR-VI-EXTREME-ASUS-3008.zip





C6H Test BIOS 0020 with AGESA 1007 (405200c4e299c1eed9a0044edec9aba51f37cee1d70caabe40b9485b0604521a)

In order to get back to an older version after flashing, you have to use USB BIOS Flashback.

Let me know how it works for you, especially regarding cold boot issues. Any confirmed bugs in the bug report form please




Beta BIOS 1501

* Workaround for some CPUs stuck at 22x ratio if using override voltage
* Fixes PCIEX4 bandwidth setting getting lost after power is removed
* Same DRAM boot behavior as 1403 (no cold boot fix)
* Same DRAM profiles as in 9920
* Still has the Vcore value issue when booting with Offset Mode and switching to Manual Mode

Crosshair VI Hero 1501 SHA256 EDE223DC6897B7199C93D9985E28B7A2CD1B8A8DB2DCBF3D3555A521DB4F045D
Crosshair VI Hero Wifi AC 1501 SHA256 0D9F51F43AA3A56A4AC984B11A52F58451B76F8A7CCB9A04E1C3194231C9D4DA






UEFI build 9920 for the C6H:

* Improved DRAM cold boot, results in slightly longer POST time
* Fix for CPU Ratio stuck at 22x on some CPUs when using Vcore override/offset
* SenseMi Skew is now Disabled by default. If you want to return to previous behavior set SenseMi Skew = Enabled and Offset = 272.
* Added DRAM profiles for Samsung B-based DIMMs with tuned subtimings, including The Stilt's settings



C6H beta UEFI 1403

* Fixed W_PUMP and AIO_PUMP speeds during POST
* Fixed Fan tuning sometimes failing
* Fixed a few issues with AMD USB3.1 ports
* Some tuning on DRAM settings, let us know how they work for you. tRDRD_Sc is still at 5 above 3500 MHz as it helps with stability. For performance you want to force this to 1. We'll consider changing this in future releases as the performance impact can be quite noticeable in certain applications.

An update on DRAM Boot Voltage, currently it should be 1.35V by default if the DRAM Voltage is changed. So if you're setting DRAM Voltage to above 1.35V, you might want to sync this setting. Additionally there might be scenarios where you will have better luck by syncing DRAM Boot Voltage to DRAM Voltage even at lower values.




AGESA 1006 RC4 official UEFI 1401

Just tested quickly 3600 memory and cold booting, seems good but you guys are going to have to help me test this before we have a judgement. Seems CPU temp reading from SIO now has -20*C offset for XFR enabled CPUs.





UEFI build 1107





Older test builds:


Test BIOS 0079

Test BIOS with new AGESA 1004a, with a couple of bugfixes. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Test BIOS 0081

Same as 0079 but has ProcODT default = 53.3 ohm

Test BIOS 0082

Same as 0081 but with a DRAM compability patch for the below part numbers

CMK16GX4M4A2133C13
AHU08GGB13CGT7G
PV416G240C5QK
F4-2400C15Q-32GRR
TCD44G2400C14BK
F4-2666C16Q2-64GRB
AVD4UZ126661504G
BLT8G4D26AFTA.16FAD
IMA41GU6MFR8N-C F0
MD16GK4D4266615AXR
HX430C15PB2K4/16
HX430C15PBK4/32
AX4U3333W4G16-QGZ
GAM4DBLBM2133D15IE041C
TC48G24S817
SP004GBLFU213N02
78.C1GM3.AF10B
F4-3200C16D-8GVKB

MTA4ATF51264AZ-2G6B1
MTA8ATF1G64AZ-2G3B1
MTA16ATF2G64AZ-2G6B1
HMA41GU7AFR8N-TF T0
HMA451U7AFR8N-TF T0
HMA41GU6AFR8N-UH N0
M378A2K43BB1-CTD
M378A1K43BB1-CRC
M378A1G43EB1-CRC

Test BIOS 0083

Same as 0081 but with "2T" DRAM Mode when using above 2666 DRAM Ratio.
243 Views
2,794 REPLIES 2,794

Hmm, the c6h wifi latest bios ver. is still 6302 until now. They're surely forgot to update it.
Does anyone know whether I could flash it to my c6h wifi?

Johnny2121 wrote:
Hmm, the c6h wifi latest bios ver. is still 6302 until now. They're surely forgot to update it.
Does anyone know whether I could flash it to my c6h wifi?


c6h bios c6h is incompatible with wifi
AMD Ryzen 7 1800X 3.6 GHZ (NOCTUA NH-U12S SE) ASUS ROG CROSSHAIR VI HERO (Sapphire Nitron+Radeon RX 580 4G) G.SKILL Flare X DDR4-3200Mhz C14 32 GB (4x8GB) Samsung 970 PRO 512 M.2 SSD \Samsung 850 PRO 512GB 550MB-520MB/s Sata3 SSD

skline00
Level 7
gupsterg, thanks for the tip. In Bios 6401 at Level 1 I get @ 94000 in Aida64 Queen whereas I get 96100 in Bios 6302 with PBO enabled.
Both Bios settings allow me to run my Flare-X 3200 ram at 3466 speed solid.

I’ll stay with Bios 6302 and PBO enabled unless and until they release a 6400 series Bios where PBO is enabled for the C6H mb.
5960x-4.4 EK EVO SPR|AsusRE5|16g DDR4-2400|Gigabyte Aorus Extr GTX1080TI+WB|2 Smsng 850 EVO 500gb ssds|2Tb WD Blk|Win10-64|PC P&C 1200W|Thrmltake X9|3 XSPC RX480 rads+ 2 D5s| Acer ET430k
2700x-PBO-EK AM4 EVO |AsusC6H16g DDR4-3200 FlareX|Zotac GTX1080+EK WB|Corsair MP500-480gNVMe PCIe3|Win10-64|EVGA 850W|ThermaltakeV51|2 360 slim rads + EK D5 vario 140|Dell U3415W

gupsterg
Level 13
Yes due to PE1 having EDC of 150A it will not boost as much as plain PBO Enabled, as that is EDC 168A. On CPUs I have used on C6H/C7H I hit EDC limiter prior to PPT/TDC in profiles I tested.
Intel Defector :eek: AMD Rebel


R9 5900X - Custom WC - ASUS Crosshair VII Hero WiFi - Ballistix Sport LT 2x16GB 3800MHz C16 - RX 6800 XT - WD SN770 2TB - 2x 870 EVO 4TB


24/7 OC: i5 4690K @ 4.9GHz CPU@1.255v 4.4GHz Cache@1.10v - Archon SB-E X2 - Asus Maximus VII Ranger
Sapphire Fury X (1145/545 ~17.7K GS 3DM FS)

:eek: CPU Validation 5.198GHz@1.314v with 4.4GHz cache + RAM 2400MHz@1T :eek:
Da Music video

Falck
Level 10
Updated without a problem. Flare X @ 3466 14-14-14-14-22-36-1T 1.4V and 1800x @ 4GHz all cores in P0. Will test with games later.

My workstation is watercooled and it needs to be reliable.

Have updated to 6401. I skipped 6302.
Have issues with the WMI I didn't have on 6201.
I monitor temperatures with HWiNFO and set fan speeds with Ai Suite.
On startup HWiNFO64 fails to update sensor information from ASUS WMI.
I ran Fan Tuning in Fan Xpert 4: Fan Xpert 4 crashed, Ai Suite became unresponsive, fans and water pump were stuck at 0 RPM (neither fans nor pump were spinning, I looked and heard, my PC is sitting on the desk next to me). I had to press the hardware reset button to prevent overheating and possibly leaking.
I ran into this problem 3 times and then rolled back to 6201.
This is not a joke, this bios update could have caused thousands of euros of damage. I'm furious.

According to HWiNFO forums the new bios versions have messed up the WMI hardware monitoring support and unpredictable things happen when the chip is queried for data. They're waiting on Asus to fix the problem.

I am still waiting for asus to fix the broken power-led and Hyperx ram Aura support, to me problems seem to be increasing not to diminish.

Falck wrote:
Updated without a problem. Flare X @ 3466 14-14-14-14-22-36-1T 1.4V and 1800x @ 4GHz all cores in P0. Will test with games later.


Please share your bios settings
AMD Ryzen 7 1800X 3.6 GHZ (NOCTUA NH-U12S SE) ASUS ROG CROSSHAIR VI HERO (Sapphire Nitron+Radeon RX 580 4G) G.SKILL Flare X DDR4-3200Mhz C14 32 GB (4x8GB) Samsung 970 PRO 512 M.2 SSD \Samsung 850 PRO 512GB 550MB-520MB/s Sata3 SSD

mito1172 wrote:
Please share your bios settings


Sorry for late reply. Here 😃 They are probably not good for lifetime, but the sttings works for me 😃

Image


[2019/01/11 05:56:01]
Ai Overclock Tuner [D.O.C.P. Standard]
D.O.C.P. [D.O.C.P DDR4-3200 14-14-14-34-1.35V]
BCLK Frequency [100.0000]
BCLK_Divider [Auto]
CPU Core Ratio [Auto]
Performance Bias [None]
Memory Frequency [DDR4-3466MHz]
Core Performance Boost [Disabled]
SMT Mode [Auto]
EPU Power Saving Mode [Disabled]
TPU [Keep Current Settings]
TRC_EOM [Auto]
TRTP_EOM [Auto]
TRRS_S_EOM [Auto]
TRRS_L_EOM [Auto]
TWTR_EOM [Auto]
TWTR_L_EOM [Auto]
TWCL_EOM [Auto]
TWR_EOM [Auto]
TFAW_EOM [Auto]
TRCT_EOM [Auto]
TREFI_EOM [Auto]
TRDRD_DD_EOM [Auto]
TRDRD_SD_EOM [Auto]
TRDRD_SC_EOM [Auto]
TRDRD_SCDLR_EOM [Auto]
TRDRD_SCL_EOM [Auto]
TWRWR_DD_EOM [Auto]
TWRWR_SD_EOM [Auto]
TWRWR_SC_EOM [Auto]
TWRWR_SCDLR_EOM [Auto]
TWRWR_SCL_EOM [Auto]
TWRRD_EOM [Auto]
TRDWR_EOM [Auto]
TWRRD_SCDLR_EOM [Auto]
Mem Over Clock Fail Count [Auto]
DRAM CAS# Latency [14]
DRAM RAS# to CAS# Read Delay [14]
DRAM RAS# to CAS# Write Delay [14]
DRAM RAS# PRE Time [14]
DRAM RAS# ACT Time [22]
Trc [36]
TrrdS [Auto]
TrrdL [Auto]
Tfaw [Auto]
TwtrS [Auto]
TwtrL [Auto]
Twr [Auto]
Trcpage [Auto]
TrdrdScl [Auto]
TwrwrScl [Auto]
Trfc [Auto]
Trfc2 [Auto]
Trfc4 [Auto]
Tcwl [Auto]
Trtp [Auto]
Trdwr [Auto]
Twrrd [Auto]
TwrwrSc [Auto]
TwrwrSd [Auto]
TwrwrDd [Auto]
TrdrdSc [Auto]
TrdrdSd [Auto]
TrdrdDd [Auto]
Tcke [Auto]
ProcODT [Auto]
Cmd2T [Auto]
Gear Down Mode [Auto]
Power Down Enable [Auto]
RttNom [Auto]
RttWr [Auto]
RttPark [Auto]
MemAddrCmdSetup [Auto]
MemCsOdtSetup [Auto]
MemCkeSetup [Auto]
MemCadBusClkDrvStren [Auto]
MemCadBusAddrCmdDrvStren [Auto]
MemCadBusCsOdtDrvStren [Auto]
MemCadBusCkeDrvStren [Auto]
CPU Load-line Calibration [Level 5]
CPU Current Capability [140%]
CPU VRM Switching Frequency [Auto]
Active Frequency Mode [Enabled]
CPU Power Duty Control [Extreme]
CPU Power Phase Control [Power Phase Response]
Manual Adjustment [Ultra Fast]
CPU Power Thermal Control [120]
VDDSOC Load-line Calibration [Level 3]
VDDSOC Current Capability [140%]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Power Phase Response]
Manual Adjustment [Ultra Fast]
DRAM Current Capability [130%]
DRAM Power Phase Control [Extreme]
DRAM Switching Frequency [Auto]
DRAM VBoot Voltage [Auto]
VTTDDR Voltage [Auto]
VPP_MEM Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
VDDP Voltage [Auto]
VDDP Standby Voltage [Auto]
1.8V Standby Voltage [Auto]
CPU 3.3v AUX [Auto]
2.5V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
PLL Tune R1 [Auto]
PLL reference voltage [Auto]
T Offset [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Promontory presence [Auto]
Clock Amplitude [Auto]
CLDO VDDP voltage [Auto]
CPU Core Voltage [Offset mode]
CPU Offset Mode Sign [+]
- CPU Core Voltage Offset [0.02500]
CPU SOC Voltage [Auto]
DRAM Voltage [1.40000]
1.8V PLL Voltage [Auto]
1.05V SB Voltage [Auto]
TPM Device Selection [Discrete TPM]
Erase fTPM NV for factory reset [Enabled]
PSS Support [Auto]
SVM Mode [Enabled]
Onboard LED [Disabled]
Q-Code LED Function [Disabled after POST]
Hyper kit Mode [Disabled]
SATA Port Enable [Enabled]
SATA Mode [RAID]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
Super I/O Clock Skew [Auto]
HD Audio Controller [Disabled]
PCIEX8_2:X4/X4 Mode [Auto]
PCIEX4_3 Bandwidth [Auto]
PCIEX16_1 Mode [Auto]
PCIEX8_2 Mode [Auto]
PCIEX4_3 Mode [Auto]
M.2 Link Mode [Auto]
SB Link Mode [Auto]
Asmedia USB 3.1 Controller [Enabled]
When system is in working state [Off]
In sleep, hibernate and soft off states [Off]
Intel LAN Controller [Enabled]
Intel LAN OPROM [Disabled]
Wi-Fi Controller [Enabled]
USB Type C Power Switch for USB3.1_E1 [Auto]
USB Type C Power Switch for USB3.1_EC2 [Auto]
ErP Ready [Disabled]
Restore On AC Power Loss [Last State]
Power On By PCI-E/PCI [Disabled]
Power On By RTC [Disabled]
Network Stack [Disabled]
Device [N\A]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
JetFlashTranscend 8GB 8.07 [CD-ROM]
ASUS SDRW-08D2S-U B911 [Auto]
USB3.1_E1 [Enabled]
USB3_1 [Enabled]
USB3_2 [Enabled]
USB3_3 [Enabled]
USB3_4 [Enabled]
USB3_5 [Enabled]
USB3_6 [Enabled]
USB3_7 [Enabled]
USB3_8 [Enabled]
USB3_9 [Enabled]
USB3_10 [Enabled]
USB2_11 [Enabled]
USB2_12 [Enabled]
USB2_13 [Enabled]
USB2_14 [Enabled]
USB_15 [Enabled]
USB_16 [Enabled]
CPU Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
PCH Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
CPU Fan Speed [Monitor]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
Chassis Fan 3 Speed [Monitor]
W_PUMP+ Speed [Monitor]
CPU Optional Fan Speed [Monitor]
AIO_PUMP Speed [Monitor]
W_FLOW Speed [Monitor]
W_IN Temperature [Monitor]
W_OUT Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Q-Fan Control [PWM Mode]
CPU Fan Smoothing Up/Down Time [15.9 sec]
CPU Fan Speed Lower Limit [200 RPM]
CPU Fan Profile [Silent]
Chassis Fan 1 Q-Fan Control [Auto]
Chassis Fan 1 Q-Fan Source [Multiple Sources]
Temperature Source 1 [CPU]
Temperature Source 2 [MotherBoard]
Temperature Source 3 [VRM]
Chassis Fan 1 Smoothing Up/Down Time [15.9 sec]
Chassis Fan 1 Speed Low Limit [200 RPM]
Chassis Fan 1 Profile [Silent]
Chassis Fan 2 Q-Fan Control [Auto]
Chassis Fan 2 Q-Fan Source [Multiple Sources]
Temperature Source 1 [CPU]
Temperature Source 2 [MotherBoard]
Temperature Source 3 [VRM]
Chassis Fan 2 Smoothing Up/Down Time [15.9 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Silent]
Chassis Fan 3 Q-Fan Control [Auto]
Chassis Fan 3 Q-Fan Source [Multiple Sources]
Temperature Source 1 [CPU]
Temperature Source 2 [MotherBoard]
Temperature Source 3 [VRM]
Chassis Fan 3 Smoothing Up/Down Time [15.9 sec]
Chassis Fan 3 Speed Low Limit [200 RPM]
Chassis Fan 3 Profile [Silent]
AIO_PUMP/W_PUMP+ Control [DC Mode]
Water Pump Upper Temperature [70]
Water Pump Max. Duty Cycle (%) [100]
Water Pump Middle Temperature [45]
Water Pump Middle. Duty Cycle(%) [100]
Water Pump Lower Temperature [40]
Water Pump Min. Duty Cycle (%) [100]
USB3_1 [Enabled]
USB3_2 [Enabled]
USB3_3 [Enabled]
USB3_4 [Enabled]
PSPP Policy [Auto]
Fast Boot [Enabled]
Next Boot after AC Power Loss [Fast Boot]
AMI Native NVMe Driver Support [Enabled]
Boot Logo Display [Enabled]
POST Delay Time [3 sec]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Disabled]
OS Type [Windows UEFI mode]
Setup Animator [Enabled]
Load from Profile [1]
Profile Name [Test]
Save to Profile [2]
CPU Core Voltage [Auto]
VDDSOC Voltage [Auto]
1.8V PLL Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
DIMM Slot Number [DIMM_A1]
Bus Interface [PCIEX16/X8_1]
RedirectForReturnDis [Auto]
L2 TLB Associativity [Auto]
Platform First Error Handling [Disabled]
Enable IBS [Auto]
Global C-state Control [Auto]
Power Supply Idle Control [Auto]
Opcache Control [Auto]
Custom Pstate0 [Custom]
Pstate0 FID [a0]
Pstate0 DID [8]
Pstate0 VID [20]
Custom Pstate1 [Auto]
Custom Pstate2 [Auto]
Custom Pstate3 [Auto]
Custom Pstate4 [Auto]
Custom Pstate5 [Auto]
Custom Pstate6 [Auto]
Custom Pstate7 [Auto]
Relaxed EDC throttling [Auto]
Downcore control [Auto]
SMTEN [Auto]
SEV-ES ASID Space Limit [1]
Streaming Stores Control [Auto]
ACPI _CST C1 Declaration [Auto]
L1 Stream HW Prefetcher [Auto]
L2 Stream HW Prefetcher [Auto]
DRAM scrub time [Auto]
Redirect scrubber control [Auto]
Disable DF sync flood propagation [Auto]
Freeze DF module queues on error [Auto]
GMI encryption control [Auto]
xGMI encryption control [Auto]
CC6 memory region encryption [Auto]
Location of private memory regions [Auto]
System probe filter [Auto]
Memory interleaving [Auto]
Memory interleaving size [Auto]
Channel interleaving hash [Auto]
Memory Clear [Auto]
ACPI SLIT Distance Control [Auto]
Fail_CNT [2]
ProcODT [Auto]
Power Down Enable [Auto]
Cmd2T [Auto]
Gear Down Mode [Auto]
CAD Bus Timing User Controls [Auto]
CAD Bus Drive Strength User Controls [Auto]
Data Bus Configuration User Controls [Auto]
Data Poisoning [Auto]
DRAM ECC Symbol Size [Auto]
DRAM ECC Enable [Auto]
TSME [Auto]
Data Scramble [Auto]
Chipselect Interleaving [Auto]
BankGroupSwap [Auto]
Address Hash Bank [Auto]
Address Hash CS [Auto]
SPD Read Optimization [Enabled]
MBIST Enable [Disabled]
MBIST Aggressors [Auto]
MBIST Per Bit Slave Die Reporting [Auto]
IOMMU [Auto]
NBIO Internal Poison Consumption [Auto]
NBIO RAS Control [Auto]
Determinism Slider [Performance]
PSI [Auto]
ACS Enable [Auto]
PCIe ARI Support [Auto]
CLDO_VDDP Control [Auto]
HD Audio Enable [Auto]
Force PCIe gen speed [Auto]
Processor temperature Control [Auto]
SOC OVERCLOCK VID [0]
Mode0 [Auto]

Falck wrote:
Sorry for late reply. Here 😃 They are probably not good for lifetime, but the sttings works for me 😃

Image


Thank You 🙂
AMD Ryzen 7 1800X 3.6 GHZ (NOCTUA NH-U12S SE) ASUS ROG CROSSHAIR VI HERO (Sapphire Nitron+Radeon RX 580 4G) G.SKILL Flare X DDR4-3200Mhz C14 32 GB (4x8GB) Samsung 970 PRO 512 M.2 SSD \Samsung 850 PRO 512GB 550MB-520MB/s Sata3 SSD

Falck wrote:
Sorry for late reply. Here 😃 They are probably not good for lifetime, but the sttings works for me 😃

Image


thank you. this setting has worked smoothly. 🙂

78276
AMD Ryzen 7 1800X 3.6 GHZ (NOCTUA NH-U12S SE) ASUS ROG CROSSHAIR VI HERO (Sapphire Nitron+Radeon RX 580 4G) G.SKILL Flare X DDR4-3200Mhz C14 32 GB (4x8GB) Samsung 970 PRO 512 M.2 SSD \Samsung 850 PRO 512GB 550MB-520MB/s Sata3 SSD