cancel
Showing results for 
Search instead for 
Did you mean: 

Crosshair VI Hero: UEFI build update thread

Raja
Level 13
Directly from Elmor:

Beta BIOS 3008 for C6H/C6HWIFI/C6E:

AGESA 1.0.7.1, temperature offset fixed after S3 resume, GPU Post function fixed, 0d with some GPUs fixed

http://www.mediafire.com/file/f95motjmh211e7h/CROSSHAIR-VI-HERO-ASUS-3008.zip
http://www.mediafire.com/file/ntn6i3jiub610ai/ROG-CROSSHAIR-VI-HERO-WIFI-AC-ASUS-3008.zip
http://www.mediafire.com/file/yj22ld2rmmedp01/ROG-CROSSHAIR-VI-EXTREME-ASUS-3008.zip





C6H Test BIOS 0020 with AGESA 1007 (405200c4e299c1eed9a0044edec9aba51f37cee1d70caabe40b9485b0604521a)

In order to get back to an older version after flashing, you have to use USB BIOS Flashback.

Let me know how it works for you, especially regarding cold boot issues. Any confirmed bugs in the bug report form please




Beta BIOS 1501

* Workaround for some CPUs stuck at 22x ratio if using override voltage
* Fixes PCIEX4 bandwidth setting getting lost after power is removed
* Same DRAM boot behavior as 1403 (no cold boot fix)
* Same DRAM profiles as in 9920
* Still has the Vcore value issue when booting with Offset Mode and switching to Manual Mode

Crosshair VI Hero 1501 SHA256 EDE223DC6897B7199C93D9985E28B7A2CD1B8A8DB2DCBF3D3555A521DB4F045D
Crosshair VI Hero Wifi AC 1501 SHA256 0D9F51F43AA3A56A4AC984B11A52F58451B76F8A7CCB9A04E1C3194231C9D4DA






UEFI build 9920 for the C6H:

* Improved DRAM cold boot, results in slightly longer POST time
* Fix for CPU Ratio stuck at 22x on some CPUs when using Vcore override/offset
* SenseMi Skew is now Disabled by default. If you want to return to previous behavior set SenseMi Skew = Enabled and Offset = 272.
* Added DRAM profiles for Samsung B-based DIMMs with tuned subtimings, including The Stilt's settings



C6H beta UEFI 1403

* Fixed W_PUMP and AIO_PUMP speeds during POST
* Fixed Fan tuning sometimes failing
* Fixed a few issues with AMD USB3.1 ports
* Some tuning on DRAM settings, let us know how they work for you. tRDRD_Sc is still at 5 above 3500 MHz as it helps with stability. For performance you want to force this to 1. We'll consider changing this in future releases as the performance impact can be quite noticeable in certain applications.

An update on DRAM Boot Voltage, currently it should be 1.35V by default if the DRAM Voltage is changed. So if you're setting DRAM Voltage to above 1.35V, you might want to sync this setting. Additionally there might be scenarios where you will have better luck by syncing DRAM Boot Voltage to DRAM Voltage even at lower values.




AGESA 1006 RC4 official UEFI 1401

Just tested quickly 3600 memory and cold booting, seems good but you guys are going to have to help me test this before we have a judgement. Seems CPU temp reading from SIO now has -20*C offset for XFR enabled CPUs.





UEFI build 1107





Older test builds:


Test BIOS 0079

Test BIOS with new AGESA 1004a, with a couple of bugfixes. Up to 5% performance increases in specific applications. Also has P-state overclocking working with BCLK increase. If you want to keep C-states, make sure to set Advanced\AMD CBS\Zen Common Options\Global C-state Control = Enabled. There are two new settings under AMD CBS\UMC Common Options\DDR4 Common Options\ you might want to take a look at, Fail_CNT and ProcODT. Fail_CNT decides how many times to retry when DRAM training fails (F9 -> 0d), default is now 1. ProcODT can help improve your DRAM overclocking. There's a setting available also on previous BIOSes under AMD CBS\UMC Common Options\DRAM Memory Mapping named BankGroupSwap. If you have 2x Single-Rank modules you can try setting this to Disabled and you might see some performance boost in certain applications.

Test BIOS 0081

Same as 0079 but has ProcODT default = 53.3 ohm

Test BIOS 0082

Same as 0081 but with a DRAM compability patch for the below part numbers

CMK16GX4M4A2133C13
AHU08GGB13CGT7G
PV416G240C5QK
F4-2400C15Q-32GRR
TCD44G2400C14BK
F4-2666C16Q2-64GRB
AVD4UZ126661504G
BLT8G4D26AFTA.16FAD
IMA41GU6MFR8N-C F0
MD16GK4D4266615AXR
HX430C15PB2K4/16
HX430C15PBK4/32
AX4U3333W4G16-QGZ
GAM4DBLBM2133D15IE041C
TC48G24S817
SP004GBLFU213N02
78.C1GM3.AF10B
F4-3200C16D-8GVKB

MTA4ATF51264AZ-2G6B1
MTA8ATF1G64AZ-2G3B1
MTA16ATF2G64AZ-2G6B1
HMA41GU7AFR8N-TF T0
HMA451U7AFR8N-TF T0
HMA41GU6AFR8N-UH N0
M378A2K43BB1-CTD
M378A1K43BB1-CRC
M378A1G43EB1-CRC

Test BIOS 0083

Same as 0081 but with "2T" DRAM Mode when using above 2666 DRAM Ratio.
670 Views
2,794 REPLIES 2,794

I saw an article about AMD releasing the codes for more ram. Is there gonna be a bios update soon?

Saltyfish wrote:
I saw an article about AMD releasing the codes for more ram. Is there gonna be a bios update soon?

ooooo man .......oooo mannnnnnn.......let's have it .....i'm feeling excited here...lol

Has anyone elses fan controls gone fubar with this EFI, getting them tamed isn't easy.

SinartNZ wrote:
Has anyone elses fan controls gone fubar with this EFI, getting them tamed isn't easy.


i had asus ai suite installed .....i uninstalled it!....i also have noticed that if i am using the q fan in bios it does work on cpu fans if the case fan q fan function is turned off....all of them with in the case fan option set to disable the cpu q fan function works as it should

I believe ived had the same issue as most on 902, ive managed to get 4.75 gig to run stable but cant get my ram past 2666 i get random codes even an 8 at times that scared me a bit.

i will give this 1001 1T a go shortly with all the comments being very positive.

Thanks for the prompt support.

You do not know when will ROG Front Base on this board? Thank you

jrbris wrote:
I believe ived had the same issue as most on 902, ive managed to get 4.75 gig to run stable but cant get my ram past 2666 i get random codes even an 8 at times that scared me a bit.

i will give this 1001 1T a go shortly with all the comments being very positive.

Thanks for the prompt support.

i have noticed on my rig when SoC voltage is too high i will get errors just like that ......i got above 2666 by setting 4 ghz on all cores running 1.375 or 1.378 vcore ...i can't remember what the settings says in bios right now ...i switched up to 4.1 ghz just now .....but anyway ....i set my 4ghz setting up and set ram to 2666 and i also set ram voltage to 1.30 in bios even though my ram calls for 1.35 for 3000 mhz because llc will bring it to 1.373 in windows .....very very important piece of this puzzle is SoC voltage .....start with a flat 0.95 ....you can then raise bclk one click at a time and test....but try keeping your cpu to a known stable clock while raising bclk
i do not know why but to much and over volting the SoC will have the same effect as not having enough Soc very hard to determine the right amount that is why i use Aida64 cache mem test so i can see the effect the voltages are having on the memory systems of this set up.....i can not post pics or i would be posting the cache mem test results showing the big ...VERY BIG difference even just one click too much SoC will cause...
i got my ram to 2725 with 102.200 bclk and timings of 14-14-14-14-32-cr1(1001 bios).....and it seems stable as a rock on ram still working that 4.1 ghz setting trying to get it stable ...i do not like the amount of vcore i need to get it stable but raising SoC more then 0.96 on my system seems to have harsh effects on overall scores in the cache mem test...thats why i say this beast of a cpu has a very strong imc and it does not need much SoC voltage at all for the speeds i am currently running ......with this set up i get 400+GB/s across the board on my l3 cache in aida64 if you're under that at 4/4.1 ghz you might be pumping to much SoC voltage.....SoC also seems to affect l2 cache as well but not as much as l3 it seems ......i have also noticed the 1.8 pll voltage if to high can cause crashing ....
i do not know why but this voltage if left on auto seems to want to run 1.87 volts....i turned it down to 1.85...i tried 1.8volts and it did not like that ...lol.
i do not know if my ramblings are even helpful..lol....but i love the hell outa this system and i want to help all who have one enjoy it as much as i do!...

hopefully this new microcode with a bios update really opens this beast up!!!! not that it really needs it ...lol.....even at the settings im running now this thing is very very impressive to me!..... but yeah man ...3000/3200 or higher ram will make this thing untouchable by intel man .....and i cant wait to see the faces on my intel fan boy friends when it does destroy all!!!! lol...and i have a lot of diehard intel freinds....lol...i already converted two of them to Ryzen..lol...but i want to convert all of them ...lmao... AMD is back to the top and never had any doubt that someday they would be !....

Hi guys!

I'm running my CH6 with BIOS 1001 with an 1800X at 3.8ghz and 1.3v.

I cannot boot with anything higher than 2805mhz memory speed. Sadly I got a 2 rank 2x16gb kit.

Corsair Vengeance Black LPX 32GB (2x16GB) / 3200MHz / DDR4 / CL16 / CMK32GX4M2B3200C16

However, I'm running them at 2805/14-16-16-31/1T.

No matter the setting I cannot get them to boot above 2805mhz. Completely stable at 2805 though.

firefreak wrote:
Hi guys!

I'm running my CH6 with BIOS 1001 with an 1800X at 3.8ghz and 1.3v.

I cannot boot with anything higher than 2805mhz memory speed. Sadly I got a 2 rank 2x16gb kit.

Corsair Vengeance Black LPX 32GB (2x16GB) / 3200MHz / DDR4 / CL16 / CMK32GX4M2B3200C16

However, I'm running them at 2805/14-16-16-31/1T.

No matter the setting I cannot get them to boot above 2805mhz. Completely stable at 2805 though.


thats awesome and is the highest i have heard anyone get a 32 gig kit .....nice work man ! you loving it?.....
im loving it 😉 lol

Demoniacstar wrote:
thats awesome and is the highest i have heard anyone get a 32 gig kit .....nice work man ! you loving it?.....
im loving it 😉 lol



I'm having bad sata transfer rates to be honest. At the moment I'm finetuning settings so I have not connected all peripherals yet.

I'm coming from an intel 3770k with 32gb ram and Asus P8Z77-V Premium motherboard and I guess I was expecting more from it. But as I said, I'm still in the tuning phase so I'm not judging my Ryzen setup just yet. 🙂