04-11-2020
02:25 AM
- last edited on
03-05-2024
07:54 PM
by
ROGBot
04-11-2020 05:05 PM
04-11-2020 06:17 PM
04-11-2020 08:45 PM
RedSector73 wrote:
Q-code 8 is 'System Agent initialization after microcode loading' which suggests a problem with CPU/Motherboard. I would be looking at these components.
04-11-2020 09:53 PM
04-11-2020 10:32 PM
04-12-2020 12:27 AM
BigJohnny wrote:
First thing I would try is removing heatsink then remounting and tighten a little at a time. Often over tighten heat sinks cause too much compression on the CPU corners and the bow up. Depending on the chip it can result is the PCIE lanes messing up or memory losing channels.*
04-15-2020 02:13 AM
BigJohnny wrote:
First thing I would try is removing heatsink then remounting and tighten a little at a time. Often over tighten heat sinks cause too much compression on the CPU corners and the bow up. Depending on the chip it can result is the PCIE lanes messing up or memory losing channels.*
07-04-2020 09:26 PM