cancel
Showing results for 
Search instead for 
Did you mean: 

CH VII + GSkill TridentZ 3466

RageTooL
Level 7
Just bought the x470 CH + 2700x + TridentZ 3466mhz memory

Memory is F4-3466C16D-32GTZR - 2 x 16GB Kit

Does anyone else use this memory?

The board wont boot setting the memory to the 3466 profile in bios. Should i just get another kit instead?
1,795 Views
4 REPLIES 4

Delta9K
Level 9
You mean by setting the DOCP profile? What BIOS, 601? I am hoping someone else has input as I was about to pick up that kit of 3466 (2x16GB). I have 4x8GB (F4-3466C16D-16GTZSK) and its not stable when using four dims. If I drop to just two dimms 2x8GB it is stable. But I really wanted 32GB. I had trouble getting it to post using the DOCP profile at first with all four dimms, I pulled two out applied the DOCP profile and was fine. I then added the other 2 sticks and was fine meaning, I could post, boot and even run several Cinebench runs, an hour of Aida 64 and couple hours of Prime but after a while using the system normally I started getting random lockups etc. I pulled two sticks back out and everything is fine at 16GB total. 8 Hours of Prime couple hours gaming using the system as normal all OK but dang I want to run 32GB and at 3400+ . As of now I am running 32GB of Corsair (CMK32GX4M2B3200C16) at 3200 and its rock solid but, I'd still like to get to 3466.

I am sure you have done this already - try re-seating the memory even swapping the slots they are in with each other. Make sure you are in A2 and B2 (second and forth slots from the CPU)
Other systems in addition to rig in the profile specs:
Aorus Master x570, 3950X, 32GB GSkill c16 @3800, Sabrent PCIe4 1TB, Sabrent 1TB, 860Evo 1TB, 2080 Super, HX1200i, Celsius S36, Define S2, pg348q
Aorus Master x570, 3900X, 32GB GSkill c16 @3800, Sabrent PCIe4 1TB, 860Evo 1TB, 5700XT, HX1000i, H150i Pro, Obsidian 500D, LG32GK650F-B
MEG x570 Unify, 3800X, 32GB GSkill c16 @3800, Sabrent PCIe4 1TB, 860Evo 1TB, GTX1080Ti, SSR-850PD, Celsius S36, Define R6, u3415w

Delta9K wrote:
You mean by setting the DOCP profile? What BIOS, 601? I am hoping someone else has input as I was about to pick up that kit of 3466 (2x16GB). I have 4x8GB (F4-3466C16D-16GTZSK) and its not stable when using four dims. If I drop to just two dimms 2x8GB it is stable. But I really wanted 32GB. I had trouble getting it to post using the DOCP profile at first with all four dimms, I pulled two out applied the DOCP profile and was fine. I then added the other 2 sticks and was fine meaning, I could post, boot and even run several Cinebench runs, an hour of Aida 64 and couple hours of Prime but after a while using the system normally I started getting random lockups etc. I pulled two sticks back out and everything is fine at 16GB total. 8 Hours of Prime couple hours gaming using the system as normal all OK but dang I want to run 32GB and at 3400+ . As of now I am running 32GB of Corsair (CMK32GX4M2B3200C16) at 3200 and its rock solid but, I'd still like to get to 3466.

I am sure you have done this already - try re-seating the memory even swapping the slots they are in with each other. Make sure you are in A2 and B2 (second and forth slots from the CPU)



Yup by setting DOCP profile. BIOS version is 0601.

When is set to DOCP sometimes it boots and sometimes it won't , but when it boots and i run cinebench and play games it just suddenly hangs.

RageTooL wrote:
Yup by setting DOCP profile. BIOS version is 0601.

When is set to DOCP sometimes it boots and sometimes it won't , but when it boots and i run cinebench and play games it just suddenly hangs.


That's a bummer - yup same symptoms basically I had when using the four sticks at 3466. Have you tried running it at a lower clock like 3400, 3333 or 3200? The 2x16gb kit of vengeance lpx @ 3200 I swapped in is rock solid... All the advice I've been getting from other forums is to try running it at a lower speed. I happened to have the other kit so I just swapped for lower speed RAM. Plus, two sticks vs four is less stressful on the IMC, and is the preferred config.
Other systems in addition to rig in the profile specs:
Aorus Master x570, 3950X, 32GB GSkill c16 @3800, Sabrent PCIe4 1TB, Sabrent 1TB, 860Evo 1TB, 2080 Super, HX1200i, Celsius S36, Define S2, pg348q
Aorus Master x570, 3900X, 32GB GSkill c16 @3800, Sabrent PCIe4 1TB, 860Evo 1TB, 5700XT, HX1000i, H150i Pro, Obsidian 500D, LG32GK650F-B
MEG x570 Unify, 3800X, 32GB GSkill c16 @3800, Sabrent PCIe4 1TB, 860Evo 1TB, GTX1080Ti, SSR-850PD, Celsius S36, Define R6, u3415w

Delta9K wrote:
That's a bummer - yup same symptoms basically I had when using the four sticks at 3466. Have you tried running it at a lower clock like 3400, 3333 or 3200? The 2x16gb kit of vengeance lpx @ 3200 I swapped in is rock solid... All the advice I've been getting from other forums is to try running it at a lower speed. I happened to have the other kit so I just swapped for lower speed RAM. Plus, two sticks vs four is less stressful on the IMC, and is the preferred config.


im just looking at a memory oc, and on the latest bios ive just hit the next two straps above 3466mhz..anyway, I clocked it back down with 4dimms (2 x 3466mhz and 2 x 4266 or something similar)... I flashed them both with the same spd data and ran them together from day one with my 1800x at 3466 when hardly anyone was hitting that speed. you probably have one dodgy dim holding you back... ive now got them at 3466 @15 15 15 32 good luck!!!
AsusCrosshairHeroVIII - 5950X
32Gb G.Skill RGB Trident 16gb3466Mhz B-Die + 16gb4266Mhz B-Die
Asus Tuf RTX3090
1TbSamsung960EVO M.2 1TbSamsung850EVO SSD Seagate2TB/3Tb CorsairForceGt 64gb
Seasonic Focus1000w 80+ Gold
Thermaltake Core X71 Tempered glass side panal