05-28-2018 12:29 PM
05-28-2018 10:29 PM
05-29-2018 06:05 AM
You mean by setting the DOCP profile? What BIOS, 601? I am hoping someone else has input as I was about to pick up that kit of 3466 (2x16GB). I have 4x8GB (F4-3466C16D-16GTZSK) and its not stable when using four dims. If I drop to just two dimms 2x8GB it is stable. But I really wanted 32GB. I had trouble getting it to post using the DOCP profile at first with all four dimms, I pulled two out applied the DOCP profile and was fine. I then added the other 2 sticks and was fine meaning, I could post, boot and even run several Cinebench runs, an hour of Aida 64 and couple hours of Prime but after a while using the system normally I started getting random lockups etc. I pulled two sticks back out and everything is fine at 16GB total. 8 Hours of Prime couple hours gaming using the system as normal all OK but dang I want to run 32GB and at 3400+ . As of now I am running 32GB of Corsair (CMK32GX4M2B3200C16) at 3200 and its rock solid but, I'd still like to get to 3466.
I am sure you have done this already - try re-seating the memory even swapping the slots they are in with each other. Make sure you are in A2 and B2 (second and forth slots from the CPU)
05-31-2018 10:38 PM
Yup by setting DOCP profile. BIOS version is 0601.
When is set to DOCP sometimes it boots and sometimes it won't , but when it boots and i run cinebench and play games it just suddenly hangs.
06-03-2018 09:14 PM
That's a bummer - yup same symptoms basically I had when using the four sticks at 3466. Have you tried running it at a lower clock like 3400, 3333 or 3200? The 2x16gb kit of vengeance lpx @ 3200 I swapped in is rock solid... All the advice I've been getting from other forums is to try running it at a lower speed. I happened to have the other kit so I just swapped for lower speed RAM. Plus, two sticks vs four is less stressful on the IMC, and is the preferred config.