C6H , R7 1700X , h115i and Flare x 3200 , Any Suggestions ? Temps ?

[sadaharu]

I am using bios 1501.

Load profile 4.0Ghz. (there was one guy, i forgot his name)

Core voltage : 1.438 - 1460 around

Soc Voltage : 1.155

Cpu temp : 50-60 Celcius at idle. (i think even for 4.0ghz its too high. Any ideas to lower this ? )

So far so good.

All drivers updated.

Only run userbenchmark for fun.

Mainly using for games.

So main questions are ...

1. What benchmark tests are you suggesting ? For ram and cpu.

2. Are those voltages are safe ?

3. Why corsair link shows 70 C and Ryzen master shows 50 C ? Which one is true ?

Thanks in advance.

I am willing to try anything and share every knowledge i know or experienced during all this trials.

Have a nice day.

Edit 1 : Cinebench crashed and rig booted 3 times to wake up.

Down to 3.8 ghz (1.35 + offset) and docp standart 3200 ram.

[gupsterg]

1. Most common is AIDA64, you can also run 3DM Skydiver and note the Physics bench sections increase as CPU/RAM is improved. I do ~3 runs to get an average. This post contains some of my test data.

2. Subjective. For me personally VID of 1.425V is MAX limit.

3. Some programs don't know if offset on X CPU is removed in UEFI or not. IIRC after UEFI 1401 the UEFI has temp offset removed. Even on the X CPU I own I use Sense MI Skew Disabled, then tCTL has the AMD +20C, tDIE in HWINFO shows it without and CPU sensor from Super IO Chip is correct so fan profiles works as needed. Example link.