I purchased this to do a small build. But from the information on Amazon's page it showed it had a bios flash back button. After taking out the box and looking I now see it doesn't. My fault for not doing better research. I have an older CPU I was g...
The next round of BIOSes for ASUS ROG 500-series motherboards based on **AGESA 1.2.0.3 Patch A** are on the way. Be sure to check the support portal over the next few days https://www.asus.com/support/
I'm currently experimenting with the 5800X3d on the x570 Prime-Pro motherboard.Joker talking about it here:https://youtu.be/-rYu-CloeFsMsi is releasing AGESA 1.2.0.7 in the next few days and we're the only manufacturer to have the 1.2.0.6C version. I...
How loud is the chipset fan (or whatever it's called) on the ROG Strix B550-I Gaming motherboard? Yesterday, I built my SFF system with a brand new X570-I and the chipset fan was ridiculously loud. It ran constantly at a bit over 6,000 RPM and soun...
Just like bios 1401 i can boot with ram on 3200 then i must enter bios to set ram @ 3600 in order to boot to Windows.Col boot @ 3600 is still a no go! System unstable when i boot @ 3466 4 out of 5 cold boots works the bios reset itself, need to boot ...
As per the title, I can't seem to find any manual on the BIOS for the Dark Hero. Asus seems to have left it out completely from the main manual . All my other Asus boards have always had some BIOS info on in the main manual.Does anyone know of anythi...
Hi all, thank you for any help or suggestions you have. I have the following setup:Crosshair VII Dark Hero5950x2x 3900 FTW32x16 g.skill 3600evga 1300 G2W11980 Pro 1TBI had installed bios 4006, but since I could not get it to boot with q code 97, I w...
Hi there,In the next few days I'm gonna switch to a Crosshair VIII Extreme, and have a couple of questions.1) Is beta BIOS 0602 good or it's better to stay on 0504?2) What's the best layout for 1 VGA and 2 SSD NVMe to get best performances?Adding a t...
New BIOS available version 4006.Updated, used old bios settings from 4004 saved as *.CMO file and loaded those into 4006. Works great for me without any issues.Greetz, Remco
I've just aquired this motherboard. My SATA drives are correctly detected in BIOS but when I run Windows 10 Disk Management half of my partitions/drives are missing.Can you please suggest a solution? Or is the mobo faulty and needs to be RMAd?!Thanks...
