So I've been mainly under-volting for lowest possible stable temps at stock since I put my system together. But part of the reason for that being that I haven't managed to get accurate temperatures when attempting any kind of over-clock. Specifically...
Check out this link for the full articlel: https://community.amd.com/community/gaming/blog/2017/03/30/amd-ryzen-community-update-2snippet which I found interesting:BIOSes based on this new code will have four important improvements for youWe have red...
Is anyone else having issues with CPU-Z when using the on-board AMD RAID? CPU-Z hangs at 65%. It appears to be querying storage. ProcMon shows no thread activity and I am unable to kill any cpuz threads/tasks. Access to those processes is denied and ...
One of my USB devices has a crazy bright LED, and it doesn't turn it off when the PC is powered off, unless I turn off the PSU or remove power entirely, of course.Is there a way to turn off USB power while the system is in off state?I'm using the ASm...
boot from a sata/raid controller card? tried getting this working briefly but I cant get it to show up in the boot options.
This might be a little off subject. I recently put together 7700K machine with a strix z270h. I had some issues with the memory which turned out to be an issue with the XMP in the new BIOS that was release. I dialed in the memory and now it work. ...
With all the bad rep the CH6 is getting, I just wanted to post up that "knock on wood" I have had pretty much zero issues. All my RGB stuff works, I updated to 0902 with no issue, my temps are steady, and I don't have a DOA, or bricked board! And a p...
I'm very confused after seeing ppl running 2933 with c15 sticks and 3200 with c14 sticks
Hey Everyone,I just want to know if any else is having issues trying to run their memory at 3200mhz or higher? At first I was running memory that wasn't not on the QVL decided to purchase some Corsair Dominators 3200mhz 16-18-18-36 which is currentl...
Most of my 08 and 0d Q-code issues seem to be from the HK back plate/foam pad.I did not get the AM4 BP and pad in my kit and I am using the AM3 back plate and pad.Instead of torquing down the nuts to the stop I torqued them just enough so that my tem...
