AMD 500 & 400 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Maximum Fan RPM

Hello,I'm having an issue with one of my fans. I have a Noctua Industrial PPC 3000 RPM, 12V PWM that was working just fine with my old Crosshair V Formula Z goes up to 3000 RPM (quite noisy and noticeable but giving a lot of pressure).Now with the C6...

injurer by Level 7
  • 4472 Views
  • 2 replies
  • 0 kudos

How to configure my RAM on BIOS

Hi. I have updated my BIOS to version 1002. Continue to recognize my RAM modules at 2133 Mhz.My RAM modules are 4 modules G. DDR4 TRIDENT Z RGB at 3200 Mhz.I got the information in the image How do I configure the modules in the BIOS for the correct ...

63614
macosan by Level 7
  • 14447 Views
  • 7 replies
  • 0 kudos

CPU heat emergency shutdown

Hello Asus team,I think you need to take another look at your current Sense Skew vs. SIO CPU temp implementation, at least at default/Auto values.Currently these settings not only lead to the CH6 keeping my 1800X from "soft" throttling (Tctl includi...

Ram speed and Core preformance boost

Hi there,I have the following questions about Ram (speed) and Core performance boost.Core performance boost,Should i set this to Auto, enable or disable in bios ? I had it set on auto and today i set on enable have no noticed any difference with benc...

cinebench r15 and other scores....

Well after a long hard battle with this board i have finally tweaked this ram to its max again on the new 1002 bios ....im still tweaking voltages and going for high ram clocks ..but as of right now it looks like i hit a wall again....this is not bad...

63661 63662 63663 63664

new bios revisions

Are there any new bios revisions near completion? A lot of us are sitting with very expensive coasters atm.

syldon by Level 10
  • 14569 Views
  • 26 replies
  • 0 kudos

Ram speed and Core preformance boost

Hi there,I have the following questions about Ram (speed) and Core performance boost.Core performance boost,Should i set this to Auto, enable or disable in bios ? I had it set on auto and today i set it on enable and i have not noticed any difference...

crosshair Vi hero OC tips and m.2 boot drive settings

Hey guys . long time member first time poster. bought a crosshair V formula in 2012 decided to upgrade again.I had a great time OCing my crosshair V to 1866 ram and even 1900 with a bit of bus clock boosting to push 4 dims and 16gb along with a 4.8 ...

vogner16 by Level 7
  • 12590 Views
  • 7 replies
  • 0 kudos

Can't get SLI to work with two ROG STRIX 1080s

Hi! I ordered a 2nd gpu and it's connected up and correctly recognized by windows, and shows up in the NVidia control panel. However there is no SLI option in the NVidia control panel; SLI doesn't even show up. The only possible thing I can think of...

63739
VATX7 by Level 7
  • 9423 Views
  • 14 replies
  • 0 kudos