AMD 500 & 400 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

16 GB RAM - 8GB Usable

This thread was originally about something else. Since I fixed that issue, another has cropped up where Windows considers one stick of 2x8 GB modules to be "Hardware Reserved", limiting me to 8 gigs of RAM. Other thread with same issue can be found h...

Trouble with AI Suite 3 and dlls

I'm running a fresh R5 1600 system with Win 10 Education 64-bit. Bios version 1403 (It happened back on 1401, 1403 didn't fix it).Have tried an Nvidia MSI 560 TI, as well as AMD XFX 7850, with the latest drivers (within the past few days).Initial ins...

How to enable XFR mode of Ryzen?

When my 1700X CPU is under load, I see that it's not working with 3.8 Ghz as it was needed to be with XFR. I did not overclock CPU. I just changed my RAM's to 3200mhz.Do you guys can use XFR? If yes, how?

chonk by Level 7
  • 38895 Views
  • 5 replies
  • 0 kudos

Sk hynix 16gb x 2 and procodt

Memory: Corsair Vengeance LPX CMK32GX4M2B3200C16 mfg rated at 3200mhz @ 1.35vCurrently 16 GBx2 at 2933 @ 96ohms, why memory boots up if I use 16GB x 4 at 3200mhz @ 46ohms and not with 16gb x 2 @3200MHz, ?Can I go higher than 96ohms for 16x2GB? W...

Xirtz by Level 7
  • 6105 Views
  • 3 replies
  • 0 kudos

Help with GPU on CH6

Hi, have just received my old MSI r9 390x 8gb back from MSI refurbished after it died. Have today unplugged my EVGA 1080 (to test the 390x before I sell it) and put the 390x in and i get q code 62 which is in fact code B2 I've been told. The pc does ...

Medic01 by Level 7
  • 1732 Views
  • 1 replies
  • 0 kudos

Lockups in the BIOS menu

Changing anything relating to my memory seems to immediately lock my BIOS up and force me to reboot. IE selecting DOCP 2 then changing it to 4 then back to 2 causes an immediate lockup.I was mostly stable following my adventures here https://rog.asus...

Pc boot twice after overclocked

PC boots,turns off after 2 seconds and then turns on automatically againIs this normal? or there is any solution to this.Oc using AI suiteNewbie and still learning how to oc properly Specs:Ryzen 1700 3.88ghzGskill trident z rgb 3200mhz

Manually setting timings in the bios (very, very long post)

EDIT I should point out first I wrote this to try to help people have some information and a method to work from. Sources for info are very convoluted and are diluted with a lot of misinformation. Hopefully this will give people a head start on getti...

syldon by Level 10
  • 55167 Views
  • 0 replies
  • 1 kudos