AMD 500 & 400 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Aura not compatible with Asus Strix 1080 OC TI?

Hi guys,Everything you was running okey earlier with my old 1060.I reinstalled windows when I added my new strix 1080 ti, that's when I got issues.So everytime I open aura I get a warning message "install driver failed" I close that window. And it po...

danoz0r by Level 8
  • 11843 Views
  • 9 replies
  • 0 kudos

Possible fix for LEDs that have stopped working?

So I noticed my LEDs behaving poorly. I of course had the Aura software installed, and my LEDs had stopped working outside of windows. Well, recently I went to screw around in my BIOS and had to walk away from it for a couple of hours. I was ready to...

USB Problems

Greetings All. I've built several "PC"s in the past, but the CH6 Hero is the only mobo that has ever given me problems. First I am not a fan of Win10. My favorite OS is Win7. I bought the CH6 Hero and the Ryzen 7 because I've been a fan of AMD an...

RPM restriction to CPU Fan

Hi,since yesterday i run my ryzen setup, full water cooled. So to keep cable ways short i used all fan connectors on the board. I recognized that bios an AI3 suite fore a cpu fan rpm > 60%, but for radiator fans it make no sense. On cpu fan i also ca...

Ram speed/timing

I would like to know (due to the lack of knowledge) if my ram runs at notmal/correct speeds.I have the following memory: g.skill tridentZ rgd (16.16.16.36) (see link for more detail) https://www.gskill.com/en/product/f4-3600c16d-16gtzrRunning the ra...

64564

Build was fine, then dead with Q-code 8

Build:Ryzen 1700xG.Skill F4-3200C14D-32GTZSWCrosshair VIWas up running fine on BIOS 902, then the machine suddenly died. I can access BIOS, but once an operating system tries to load I get bootloops or freezes with Q-code 8, RAM light flashing. Thing...

No ethernet on crosshair 6 after new build

Im absolutely guttered. I know its a new architecture but i am so pissed off right now. Everything is cable tied. The build is should of been finished for use about 5 hours ago. Im really guttered by asus. As there is nothing on the internet to help ...

purecain by Level 9
  • 9733 Views
  • 22 replies
  • 0 kudos