I need some help figuring out how I can power two GPUs.I have an Asus CH6 w/1700X, eVGA 850W Platinum PS, 1080GTX, 1060 SSC, wifi card and a soundblaster Z. The setup is like this:PCIEX1_1: Intel AC7260 wifi cardPCIEX16: Zotac 1080 GTXPCIEX8_2: eVGA ...
Hello,I have been using this board for a while, and i'm very happy with it.No issues with RAM as i can run my flare x at 3200 cl14 no cold boot issues.I have a STRIX 1080 TI OC and i used to control both my MB and graphics card from aura, but after a...
I have 2Kits of F4-3200C14D-32GTZ and would like to share timing and some tips for getting good memory speeds without errors and running RAM cooler. The idea is to get ProcODT_SM voltage low to help ram run at lower power . I was stuck at ProcODT_S...
I am using bios 1501.Load profile 4.0Ghz. (there was one guy, i forgot his name)Core voltage : 1.438 - 1460 aroundSoc Voltage : 1.155Cpu temp : 50-60 Celcius at idle. (i think even for 4.0ghz its too high. Any ideas to lower this ? )So far so good.Al...
It seems like a buggy software. I'm trying to increase fan speed, it stops it. I try to stop it, it makes it full speed. What's the alternative? Do you guys using it? I just want to have fan profiles without bugs and problems.
Hi to all,please I need help. I have:CROSSHAIR VI HEROTEAMGROUP NIGHTHAWK RGB 16 GB 3200 MHZRYZEN 5 1600XBios 1501I was running fine with bios 9920, both memory sticks installed. Then I've upgraded to 1501 and it starts to beeps 6 times and displays ...
I just wanted to let everyone know that when I tried to update the BIOS to the 1403 version it bricked my motherboard, but I managed to flash back to the older 1201 version. It took 7 tries using the flash button on the IO panel but it did go back. B...
So I've printed and secured a fan to the m.2 fan holder but can't seem to find a good way to attach it. Has anyone had any luck? It looks like I need longer screws and spacers or standoffs.
Some of the AMD CBS settings have been duplicated to Extreme Tweaker > DRAM Timings Control. This is a plus as when a Q-Code: F9 (ie memory training error) occurs and AMD CBS gets reset the values set on Extreme Tweaker are not.Any value that is dupl...
Hi clue what it can be a problem PC does not start with the first tee with the acceleration to RAM it drops to 2133 3200.cpu 1800x bios 1501 dram 4x8 G.Skill Trident Z 32GB DDR4 32GTZSW K4 3200 C16
