AMD 500 & 400 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Bios 9920 worth that 1403

with 1403 i'm reach 3200mhz (cpu-Z show me 1599mhz) with 4x 8GB G.Skill Trident Z RGB 3600Mhz easely but so many cold boot crashwith 9920 so many cold boot crash too (no difference) and with the same config for my ram CPU-Z show me 900mhz...when RAM...

nicduch by Level 9
  • 5479 Views
  • 12 replies
  • 0 kudos

Line Out Audio Issues

Hello all, I recently swapped speakers to a pair of active Kanto Yumi (https://kantoaudio.com/product/yumi/). Using the 3.5 Line Out I am getting a high frequency hum and it is driving me crazy. I have the ability to hook the speakers up via optica...

Crosshair VI Error Code 8 Straight from box?

Hi,Just got my Crosshair VI motherboard after Amazon delaying the delivery of the board for near 1 week. Everything was good but so far no boot. Error code 8 has shown up every time. Read online about solutions but it's hard to get a clear answer. So...

Suddenly q code 56 no boot...

Hi,my system was stable until last night no problems but today my system won't boot with code 56.I have a ryzen 1700 OC with pstates and offset @3.8ghz with 1.375v stable with prime and occt. Ram gskill flare x 3200hz @2933 14,14,14,34 with 1.35v.I c...

Ocelot by Level 7
  • 5268 Views
  • 9 replies
  • 0 kudos

Correct BIOS NVME M.2 Settings and other oddities

First question is like the title says. I bought a Samsung 960 EVO Series - 250GB PCIe NVMe - M.2 Internal SSD (MZ-V6E250BW) and I would like to know exactly what settings in the bios do I need to enable to achieve full speeds while in windows.Second ...

2 pumps connected to single W_PUMP+ PWM header?

So, the Crosshair VI Hero only has a single W_PUMP+ PWM header, but I have two EK-XTOP Revo D5 PWM pumps. It says the W_PUMP+ header has a max power of 36 watts, but each pump has a power consumption of 23 watts, or 46 watts together, so 10 watts hi...

CPU temp at -79°C ??

So this has happened twice tonight.I'm messing around in Fan Xpert4 and AIDA64. Doing stress tests and adjusting my fan profiles, when all of a sudden the CPU temp and Motherboard temp plummet to -79°C (CPU) and -70°C (Motherboard) and stay there unt...

DanniV8 by Level 7
  • 13360 Views
  • 11 replies
  • 0 kudos

Pstates resets ieself....

Hi,Im not sure if it is the same issue as the Cold boot bug.When I cold start my computer it takes some time before anything appears on my screen my monitor doesnt have a signal and in windows I can see that my OC settings are not working. In bios al...

Ocelot by Level 7
  • 1447 Views
  • 2 replies
  • 0 kudos