I am using bios 1501.Load profile 4.0Ghz. (there was one guy, i forgot his name)Core voltage : 1.438 - 1460 aroundSoc Voltage : 1.155Cpu temp : 50-60 Celcius at idle. (i think even for 4.0ghz its too high. Any ideas to lower this ? )So far so good.Al...
It seems like a buggy software. I'm trying to increase fan speed, it stops it. I try to stop it, it makes it full speed. What's the alternative? Do you guys using it? I just want to have fan profiles without bugs and problems.
Hi to all,please I need help. I have:CROSSHAIR VI HEROTEAMGROUP NIGHTHAWK RGB 16 GB 3200 MHZRYZEN 5 1600XBios 1501I was running fine with bios 9920, both memory sticks installed. Then I've upgraded to 1501 and it starts to beeps 6 times and displays ...
I just wanted to let everyone know that when I tried to update the BIOS to the 1403 version it bricked my motherboard, but I managed to flash back to the older 1201 version. It took 7 tries using the flash button on the IO panel but it did go back. B...
So I've printed and secured a fan to the m.2 fan holder but can't seem to find a good way to attach it. Has anyone had any luck? It looks like I need longer screws and spacers or standoffs.
Some of the AMD CBS settings have been duplicated to Extreme Tweaker > DRAM Timings Control. This is a plus as when a Q-Code: F9 (ie memory training error) occurs and AMD CBS gets reset the values set on Extreme Tweaker are not.Any value that is dupl...
Hi clue what it can be a problem PC does not start with the first tee with the acceleration to RAM it drops to 2133 3200.cpu 1800x bios 1501 dram 4x8 G.Skill Trident Z 32GB DDR4 32GTZSW K4 3200 C16
Hi.So the problem I've been having is that I'm playing games and really living into it and then all of a sudden the computer shuts off without warning. It was more frequent when everything was new, then it got a lot better after the 1403 Bios, but st...
It seems very difficult to get the CPU stabled when the ram is overclocked above 3200Mhz. I have run a stress test (realbench, 1hr) and could not pass when the ram is 3466Mhz or 3600Mhz(even if I increase CPU voltage). When 3200Mhz, I was able to pas...
I can see this anomaly in Aida64 quite often:The CPU temperature is also strange, but that's not the main trouble.But the VRM and Chipset temperature jumps between 1°C and 255°C, and I have no idea what could cause this. Of course during these jumps ...
