Hello everyone,I'm working on finishing up my new Ryzen 1700x build and was wondering what CPU temps and speeds (low, medium, and highest) you guys were able to achieve? I'm using an AiO watercool solution. Right now I'm at 3700 Ghz. My temps in ...
I was able to set up my RAM to work at 3066MHz here: Setting-up-G-Skill-F4-3200C14D-16GTZRXThe problem is that my board sometimes boots up normally but sometimes it resets with: "Your memory settings have been reset due to failure to boot".This happe...
I've set up my RAM: Setting-up-G-Skill-F4-3200C14D-16GTZRXAs I was running AIDA64 System Stability test with my settings for over 10 hours without issues at 3066MHz I thought that I have solved all issues and a BIOS update would make 3200 MHz accessi...
This is not a review as there are many out there. Mostly good and some complaining of poor optimization when gaming. Other reviewers basing their results on a 3.5GHz saying locked frequency and skewed graphs showing better results for Intel I7-6900K ...
I have a problem where my system will reset the ram back to 2133Mhz even though i have it set to 3200Mhz in bios.It runs fine at 3200Mhz just some times when I turn my PC on it resets it and i have to go back in bios to set it again. The system power...
I recently started using Keybot to add some features to my somewhat old Saitek eclipse keyboard. Only issue is that when keybot is enabled, the dedicated volume up/down/mute buttons no longer work. Turning keybot off again allows them to work. Curren...
Anyone have any advice regarding this memory? I've tried the standard quick tricks, but it doesn't seem to want to go over 2933Mhz.
hi guys,I'm having a problem with my Corsair CMD16GX4M2B3000C15. It won't apply XMP in bios no matter which DOCP I select. The sticks just ignored the setting. I tried with manual overclock, update the bios from 1501 to 1602 but no luck, only running...
Just wanted to express my love for the fact that now my system will run at 3200mhz even though it took almost a year. I just went into the bios set timings and frequency and boda-bing boda-boom!
Hello ROG forum, I bought an ASUS board for the first time ever about a month ago. My first experience so far hasn't been the greatest personally (my M.2 screws did not come in the box or in the board, ASUS would not send a replacement nor would Newe...
