AMD 500 & 400 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

new rig. many issues...

Hi guys, Iv built my 1st rig on a crosshairs here vii (wifi) motherboard. My 1st issue is a constant 24 code which is something to do with the RAM and may explain why my Corsair Vengance RGB pro is stuck in rainbow mode and no software will recogni...

caveo by Level 7
  • 876 Views
  • 0 replies
  • 0 kudos

C7H Error code "F9" when 2 RAM slots used

Hello - I'm new to the forum. I have a problem with my Crosshair VII hero motherboard - this problem started happening recently, but did not happen before.When I have 2 RAM sticks plugged into the motherboard (plugged into A2 and B2 slots), when I po...

RT-XD by Level 7
  • 6152 Views
  • 2 replies
  • 1 kudos

Mixed RAM for a ROG STRIX x470?

This may need a bit of background story, so please read and wait for it... I started off with 4 sticks of 8GB modules, G-Skill, non QVL and could only get up to 2133 so i ran with that for a few months. Yes I could have messed with timings and such m...

homdax by Level 7
  • 2369 Views
  • 7 replies
  • 0 kudos

Crosshair VII/2700x - How to get faster speeds w/ 4 DIMMs?

Is there any way to get faster speeds on this board with 4 DIMMs populated?I have a use case that needs more than 16GB of memory, so I ended up using a 4x8gb config totaling 32GB. At 16GB (2 sticks) I had no problem running at 3600Mhz (the rated spe...

Zefram by Level 10
  • 5919 Views
  • 13 replies
  • 0 kudos

Crosshair 7 vddp voltage

Fighting with major memory instability, I resorted to looking at old screenshots of hwinfo and comparing voltages from ~6 months ago when my system was rock solid, to now, when its barely able to run xmp settings. VDDP used to be .98von auto, it was ...

Leuts by Level 7
  • 6340 Views
  • 7 replies
  • 0 kudos

Fan speed control in Windows.

Is there an application where I can monitor fan speed control, in Windows? Not through the BIOS.I don't want to change the fan speed. I just want to know how fast it's running.Is there some utility from Asus Crosshair motherboards, that lets me do ...

are there no HPET options in bios? Vi Hero

i have ryzen 1800x, crosshair vi hero, win 10 X64i did the thing in cmd prompt to disable hpet, have read others with my MB have enabled/disabled via bios but i can not find the option. Is it there? someone else told me that if high performance event...

AMD Chipset driver 18.40.02 for CH VII

Did anyone see that new AMD chipset for Crosshair VII?I was wondering if you were able to install it, because I was trying x times and I still only get error 1603 from AMD.Need to mention that I am running Nvidia RTX2080 in my system Win10 (1809)I kn...

77923
Rewerend by Level 9
  • 8500 Views
  • 17 replies
  • 0 kudos