Hello - I'm new to the forum. I have a problem with my Crosshair VII hero motherboard - this problem started happening recently, but did not happen before.When I have 2 RAM sticks plugged into the motherboard (plugged into A2 and B2 slots), when I po...
This may need a bit of background story, so please read and wait for it... I started off with 4 sticks of 8GB modules, G-Skill, non QVL and could only get up to 2133 so i ran with that for a few months. Yes I could have messed with timings and such m...
Is there any way to get faster speeds on this board with 4 DIMMs populated?I have a use case that needs more than 16GB of memory, so I ended up using a 4x8gb config totaling 32GB. At 16GB (2 sticks) I had no problem running at 3600Mhz (the rated spe...
Fighting with major memory instability, I resorted to looking at old screenshots of hwinfo and comparing voltages from ~6 months ago when my system was rock solid, to now, when its barely able to run xmp settings. VDDP used to be .98von auto, it was ...
Is there an application where I can monitor fan speed control, in Windows? Not through the BIOS.I don't want to change the fan speed. I just want to know how fast it's running.Is there some utility from Asus Crosshair motherboards, that lets me do ...
i have ryzen 1800x, crosshair vi hero, win 10 X64i did the thing in cmd prompt to disable hpet, have read others with my MB have enabled/disabled via bios but i can not find the option. Is it there? someone else told me that if high performance event...
Title. I've been effing around in the bios, and at this point I've flipped so many switches and pushed so many buttons that.... well, I've realized I'm a dumbass who shouldn't have access to switches and buttons without adult supervision. Fires...
Hey all,So I recently rebuilt my PC to the following:Fractal Design Meshify CCrosshair VII Hero (from an ASRock H97 Pro4)Ryzen 2700X (from an i7 4970k)32GB (2x16) TridentZ DDR4 3200MHz C14 RAM (from 32GB 4x8 G.Skill DDR3)EVGA Supernova G3 650W PSUEVG...
Did anyone see that new AMD chipset for Crosshair VII?I was wondering if you were able to install it, because I was trying x times and I still only get error 1603 from AMD.Need to mention that I am running Nvidia RTX2080 in my system Win10 (1809)I kn...
I have been trying to figure this out since we have upgraded to GIG internet. No matter what I do, when I run a speedtest, I am only pulling around 380Mbps DL and 38Mbps UL. The ISP has come out and tested the output of the ethernet ports of the rou...
