Did the ol' BIOS flash and started up fine, set all my old settings that were stable and now the BIOS menus freeze up and crash every time. Couldn't even attempted to change anything and windows would boot 1 out of 3 attempts. Just letting others kno...
Hy guys i'm new here and i just bought a new systamen, i builit, updated the bios to 0804 and it boot, after that i tried to get my ram to what is rated for 3200 and, it looked stable, cinebench fine, prime 95 no problem, at this poit the system was ...
Hi all,I'm setting up Fan Xpert to control my case fans based on the different temperature sensors on this board. The description on the webpage for this board indicates that there is a sensor for VRM temperatures,; but I only see CPU, Motherboard an...
I think that this probably cause some WMI incorrectness but you have to see it
Curious if anyone else that has this motherboard has experienced random shutdowns on this board. I switched over from the ASRock TaiChi X370, using all the same components but the CPU. Did not experience any issues on the old board and the temperatur...
Hey,I am a crosshair 7 hero user and was surprised by the lack of updated drivers which are not posted on our support page. Given this I decided to use my rig as a test bed to try new driver, in particular the audio ones (ASUS state the crosshair 7 h...
I have a ryzen 2700x with 2 G.Skill trident rgb 3600 cl18 gtzrx (amd compatible) on a motherboard ASUS ROG STrix x470. I have problems with the memory when I place the dimm in A2 B2 positions that are the ones that mark the motherboard as priority. W...
I have a ROG Crosshair VII Hero MB with a 2700X processor, a Sandisk Extreme Pro for a boot drive and a Samsung EVO 970 M.2 drive in the lower M.2 slot. I am using the Microsoft driver for the 970 until Samsung/Microsoft resolve the version 3 driver...
Was monitoring temps and fans speeds while playing games today, and noticed this strange reading in HWInfo. Noticed the same yesterday too, but values were lower.System Specs:CH VII / 2600X / GSkill FlareX 3200 CAS14 / EVGA G3 1KW PSU / Noctua NH-D1...
Voltage is added under any condition, just as red on the attached screenshot. This additional voltage is at least 0.05 to 0.12 and is the same for adjusting LLC. As a result, I think red is more reliable. This is because the results are displayed dur...
