I seem to have issues getting my 1080Ti to run at x16 , I have an NVME drive, so I'm assuming that's the "problem" , but even with 16x + 4x thats enough lanes on my 3800x to take care of that, leaving me to believe it's my settings, can someone help ...
Hi,New owner of a Crosshair VII Hero (WiFi) mobo.I noticed in the BIOS that the PCH Temp reading seems stuck at +127C.This is with out-of-the-box stock settings. I don't believe the PCH is really at 127, feels more like an error/bug?Have tried updati...
The drivers version 19.30.28 2019/12/20 appeared on the site, I compared them with the drivers version 2019/07/31 :mad:, they are the same! Compared SHA-1 files it is the same!
Hello,My fan curve set on BIOS tu use as Water In as the source. However, the fan does not change it speed when the Water Temp rise. Latest 1201 BIOS, fan connected to Chassis 2 & 3 header.The fan curve setup is something like this (Cryorig QF120 Per...
Hello all,First, it's my first post here and i'm glad to expose my issue with all of you.So i've recently build a new PC and i'm rise to a problem with my RAM.My build :MB : Asus ROG Crosshair VIII Hero (Wi-Fi)CPU : AMD Ryzen 9 3900XRAM : Corsair Ven...
I recently updated my bios from 2901 to 3004 , and I noticed I can't overclock ANYTHING on 3004 , 2901 was as simple as me setting my FCLK to 1800 , DRAM frequency to 3600 , and DRAM voltage to 1.45V , and it worked everytime, no problems. Moving to ...
do you think we could get a updated AGESA 1.0.0.4 FROM YOU GUYS at some point for your flagship ROG boards, the ROG Crosshair VII WiFi etc still does not have a stable 1.0.0.4 update, when you have released this stable for other cheaper x470 boards l...
So, if I launch HWInfo, Hardware Monitor, iQUE, or MSI Afterburner the computer severely stalls for a few seconds then the program opens. If I have any sound playing the sound freezes and stutters. I can't really figure out what's causing it.This i...
so i updated both my CH6 and CH7 with the latest bios agesa 1.0.0.4B.i don´t overclock i just set the voltage in the bios to manual and 1.33v.that was prime stable and with the old bios i had clocks around 4200-4300 mhz on both systems (3700x) under...
Safe to update? It will not going to brick my mobo?
