Hi, So going into my motherboard BIOS (rog strix x570-f gaming) I noticed that the CPU voltage was high. 1.456v and the CPU Temp is high at 50 degrees on idle. is that notmal or should I be doing something to lower these results.. Thanks guys..!!
has anyone tried bios 2103 on this board right now I have 2010
My Setup:MB - 570 Crosshair Formula ViiiCPU - Ryzen 9 3950XGPU - ASUS STIX 2070 SuperMemory - G.Skill RGB Trident 2 X 16GB 3600 MHZ - 32GBStorage - Primary - M.2 Adata 2TB SSD, Secondary - 500 GB Segate SSDI purchased a 32 GB kit, the same kit I ha...
Hi, I'll be using a total of 8 bequiet! silent wings 3 120mm high-speed PWM fans in my build. Their individual input current is 0.37 A. Two of them I intend to use to cool the GPU heatsink and will hook up to the GPU with SATA connector for drawing p...
Hi,my system has been rock stable since I bought it at release, running 3733 with dram calculator settingsyesterday I installed 2010 bios and system is unstable, even at stock settings (load optimized defaults), also tried DOCP, and manually setting ...
Asus start pushing new BIOSCrosshair series new bios 2010 include AM4 combo V2 PI 1.0.0.1 patch Bx570 strix-e new bios 1409 (no info)
Hi,I've been having some trouble with this system booting up and posting into the UEFI with a RTX 2080 Super.MB: Crosshair VIII Hero X570 BIOS 2103 (latest)CPU: Ryzen 3900XMemory: Gskill DDR4-3200 16GBx2 CL16Video card: EVGA RTX 2080 Super FTW3 Ultra...
So I have gone into the UEFI on my Strix X570-F Gaming board and changed the power settings so that when my PC is turned off my USB ports have no power coming through to my peripherals. I just wanted to be sure that if it was needed my USB BIOS Flash...
Hi everyone, I am having issues with this motherboard because it forces the system to go to sleep. I found that everytime the system went to sleep some how the system was changing the power plans from Performance to Power Saver. After messing around ...
today I just got my new G-skill 3200mhz 64gb ram, at first the computer would not start so I reset the bios and put in all my settings set the memory docp and system is running good
