AMD 500 & 400 Series
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

1x m.2 NVMe boot drive, 6 x 2tb hdd for raid

I am attempting to install windows 10 to ONE crucial mx500 m.2 drive on slot m.2_1 on my Asus Prime x470-pro motherboard. In the process of doing so, I am trying to setup a RAID10 with my 6 sata ports for storage. I have followed every post I could f...

diesllc by Level 7
  • 3707 Views
  • 3 replies
  • 0 kudos

Crosshair VIII Hero new build q code 00

I am building a pc for the first time. I have a crosshair VIII Hero and:AMD Ryzen 3900x2 16 GB Corsair compatible RAMSamsung 970 EVO Plus SSD 1 TBPowerColor Red Dragon Radeon Rx 5700 8gbCreative Sound Balster AE-9I have power, the fans are working, ...

Crosshair V Formula Z NIC Speed

I had a HDD fry out on me and decided the time was right to finally upgrade from Win7 Pro to Win10 Pro.. everything seems to be fine, except my network speed.The official Intel driver installation program doesn't recognize the built in NIC and the As...

Z490-A Prime will not boot into bios no matter what

Hey guys. I have win 10 pro and recently something changed. I cannot boot into the uefi no matter what. Even if I go through windows settings recovery and tell it to boot into the uefi. The system boots right to windows and I no longer see the Asus s...

Intermittent No Display and No POST on ASUS X570-P

Hello,I wonder if anyone has any ideas as i'm running out of things to try. I recently purchased a new system, specs below, which would about 50% of the time not POST or give any display output (fans on/lights on etc). When it does boot it runs perfe...

Prime X570-P EATX12V_2 needed?

Hi,I have an X570-P motherboard, a 3600x CPU, 5700XT GPU, 2 SSDs, 1HDD. I'm overclocking the RAMs to 3200MHz using the BIOS settings, nothing fancy.My power supply - Super Flower Leadex II Gold 650W does not have the additional EATX12V_2 connector (t...

Crosshair VIII Wifi - POST Q-Code Stops at 14/15

So, first attempt at POSTing my build. Crosshair VIII, 3900XT, 2 x 16mb Trident Z-Nero RAM.All the fans come on, the RBG lights, the pump, etc. The RAM LEDs also light up. No beeps or anything though,Unfortunately, the QCode stops at 15, and the QL...

bjcsoln by Level 7
  • 5534 Views
  • 7 replies
  • 0 kudos

C7H Recommended OC settings for PE3

Hey curious if any of you could recommend some settings while running Performance Enhancer Level 3 in the BIOS.I have a 2700x, 16gb of 3200 cl14 bdie samsung ram, Corsair H150i Pro 360 AIO, and am running DOCP 3200 with Stilts Fast 3200 timing preset...