06-04-2018 08:46 PM
11-08-2019 02:01 PM
11-08-2019 03:11 PM
Mr. Sunshine wrote:
I would say a Noctua NH-15 would be good but AIO or WC loop would be better. As far a VRMs the board will most likely be fine with good airflow. Its rated for 360A max output. A 3900X puts out 142w full load which even if it was pulling 1.5v under load would be 210-215A. But the 3000 series chips under full load are about 1.35-1.38v all core which is 190-195A. So just over half the max out put of the board.
3950X will be full load 240A range at worst, which is 65% of max output. But in all reality if your running 16 core at full load for long periods of time then you should be investing in a Threadripper system. And I would say no to OC the 3950X on this board.
11-08-2019 04:05 PM
Spook161 wrote:
I found this video very interesting. Its not all about how much the VRM can handle, but about how well the heat is dissipated as well. The VRM may be able to do 360w, but if its getting too hot, you'll run into thermal throttling. That being said, my 2700x requires much more wattage than my 3800x does, nearly twice the amount of power. last I checked 16cores/2 = 8, or the 3800x, vs the 3950x so maybe its fine.
11-08-2019 11:09 PM
Alex0915 wrote:
Thats something I was wondering about since I have a 2700X, how much more wattage does a 3950X require and how much more heat does it generate than a 2700X? What about comparing the 2700X vs the 3900X?
11-09-2019 09:15 PM
11-10-2019 10:28 AM
11-10-2019 07:44 PM
11-11-2019 01:30 AM
Crosslhs82_ wrote:
LOL
I hope it's worth the wait.
11-13-2019 11:13 AM
topfn wrote:
@qpens8:
Uninstall your asmedia drivers(if you had them manually installed before) and then install "pure" asmedia drivers (1.16.59.1) from there
waiting for strix-f agesa 1.0.0.4 be like: