Asus Strix X470-F Gaming owners thread

[AniChatt]

Hello guys, I am starting this thread for all Stix X470-F owners to discuss their overclock settings, issues etc. So that everyone get help quickly in a organised way. Installed my old 1600x in this mobo with 4011 bios and flareX 3200 with default docp and it works just fine without any issues so far. One thing to mention The board pushes 1.15v soc default docp profile. Is it normal seems a bit high for me as I have upgraded from B350-F gaming.
However a small issue I believe, the asus lighting control is not behaving normal. I mean just after login to windows it is taking a bit time to start (5min) before that if I try to on Lighting Control by clicking it, program crash window appears after few seconds. But when it starts on it's own then I can open asus lighting control. Anyone experiencing similar issue???
Also tried to use older version.

[Orb79]

SumTingWong wrote:
Your ram xmp works fine?

I dont use the DOCP setting, I have 3600 cl16 memory, which is not stable on the 2700x.

So im using Ryzen dram calculator, safe preset for samsung B-die, 3533 CL14

This is stable, altough when the ram temperature gets at roughly 49 degrees is not 100% stable anymore.
But it does not get close to those temps, but I can simulate it by disabling intakes and exhausts

[xxsukuxx]

My temperature and voltagem with my 2700x is so hight (cooler box) what i can do? is better put offset or another thing?

[Plan3tCrack3r]

xxsukuxx wrote:
My temperature and voltagem with my 2700x is so hight (cooler box) what i can do? is better put offset or another thing?

Post some more details. Specs, assuming X470-F board, but what cooler (air or liquid), case, BIOS settings, auto or manual OC, ambient room temp, CPU temps under what load, GPU and CPU at idle temps for comparison.

[xxsukuxx]

Plan3tCrack3r wrote:
Post some more details. Specs, assuming X470-F board, but what cooler (air or liquid), case, BIOS settings, auto or manual OC, ambient room temp, CPU temps under what load, GPU and CPU at idle temps for comparison.

2700x with AMD Cooler box, bios is all default, only set memory frequency, Auto clock..(AMD Precison Boost is default)
ambien room temperature is about 30 °C, idle temperature cpu is about 40-42 (every time with voltage 1.45, 1.5v) (default bios)

[platonastza]

xxsukuxx wrote:
2700x with AMD Cooler box, bios is all default, only set memory frequency, Auto clock..(AMD Precison Boost is default)
ambien room temperature is about 30 °C, idle temperature cpu is about 40-42 (every time with voltage 1.45, 1.5v) (default bios)

Well idle temps look fine...idle voltage not....maybe change min cpu power to 10 or 5% in order to clock down when not needed...voltage will drop to like 0.7 when not in load and try a negative 0.05 voltage.

[Cherios]

xxsukuxx wrote:
2700x with AMD Cooler box, bios is all default, only set memory frequency, Auto clock..(AMD Precison Boost is default)
ambien room temperature is about 30 °C, idle temperature cpu is about 40-42 (every time with voltage 1.45, 1.5v) (default bios)

Check to see if it switched to amd ryzen balance power plan, mine did that, I was using balanced before

[Niptech]

I'm using bios version 4207 with 2700X would you recomned me to upgrade to 5601?
As others, I using an old bios due to the cpu fan spikes with newer bios, have they fixed it?

[platonastza]

Niptech wrote:
I'm using bios version 4207 with 2700X would you recomned me to upgrade to 5601?
As others, I using an old bios due to the cpu fan spikes with newer bios, have they fixed it?

Btw i am using 4602 with my 2700x and it doesn`t have the crazy fan bug.

[Aeratiel]

5603 is out

2020/08/1114.08 MBytes
ROG STRIX X470-F GAMING BIOS 5603
Improve system stability

[Cherios]

Running a second m.2 nvme drive, would mean my only second m.2 would run at x4 sata speeds, due to bandwidth limitations right? or would it effect other m.2 nvme aswell.