cancel
Showing results for 
Search instead for 
Did you mean: 

Asus Strix X470-F Gaming owners thread

AniChatt
Level 9
Hello guys, I am starting this thread for all Stix X470-F owners to discuss their overclock settings, issues etc. So that everyone get help quickly in a organised way. Installed my old 1600x in this mobo with 4011 bios and flareX 3200 with default docp and it works just fine without any issues so far. One thing to mention The board pushes 1.15v soc default docp profile. Is it normal seems a bit high for me as I have upgraded from B350-F gaming.
However a small issue I believe, the asus lighting control is not behaving normal. I mean just after login to windows it is taking a bit time to start (5min) before that if I try to on Lighting Control by clicking it, program crash window appears after few seconds. But when it starts on it's own then I can open asus lighting control. Anyone experiencing similar issue???
Also tried to use older version.
815 Views
2,438 REPLIES 2,438

Topfn wrote:
fixed CPU voltage on a ryzen X? why?


Because my Ryzen5 2600X chip are not a gold one, I lost the silicon lottery and this chip are some weird, the 4200mhz are not stable under 1.4250, I try all other voltage configh of this forum and all i have with are BSD or screen off...

https://rog.asus.com/forum/showthread.php?102858-Asus-Strix-X470-F-Gaming-owners-thread/page89#post7...

Yes I try this one too...

EEFREETH wrote:
Because my Ryzen5 2600X chip are not a gold one, I lost the silicon lottery and this chip are some weird, the 4200mhz are not stable under 1.4250, I try all other voltage configh of this forum and all i have with are BSD or screen off...

https://rog.asus.com/forum/showthread.php?102858-Asus-Strix-X470-F-Gaming-owners-thread/page89#post7...

Yes I try this one too...


Just stay below 1.38V if you manually overclock your 2nd gen ryzen cpu on all cores and do not want it to degrade over time. 1.425v is not safe for 24/7 even with windows balanced power plan and your voltage going down while idling, under load this is way too high for 2nd gen ryzen. Not telling you what to do ofc it's your own decision. Depending on how long you used that voltage your cpu might already been degraded since you're complaining about "a bad cpu" as you can see in the reddit thread I linked it can happen after 3 months already at 1.425V.

So only important thing is to stay under 1.35V (I have R5 1600) to avoid degradation regardless of temperature or fixed voltage?

lorcav123 wrote:
So only important thing is to stay under 1.35V (I have R5 1600) to avoid degradation regardless of temperature or fixed voltage?


Please make the effort and read carefully. The safe max voltage for 1st gen ryzen (R5 1600) is 1.425V with adequate cooling, if someone is using the stock cooler 1.425V will probs be to hot. Ryzen tends to lose stability above 70C, up to 80C is still okay while stress testing I'd say.

1.38V is the recommended safe max for 2nd gen ryzen (2600X,2700X etc.) if you allcore oc.

is the spread spectrum bios toggle fixed in the latest bios?

norman_87 wrote:
Just stay below 1.38V if you manually overclock your 2nd gen ryzen cpu on all cores and do not want it to degrade over time. 1.425v is not safe for 24/7 even with windows balanced power plan and your voltage going down while idling, under load this is way too high for 2nd gen ryzen. Not telling you what to do ofc it's your own decision. Depending on how long you used that voltage your cpu might already been degraded since you're complaining about "a bad cpu" as you can see in the reddit thread I linked it can happen after 3 months already at 1.425V.


I have since August 2018 with this OC and this Chip, so I really don't see any degrading on the chip, the issue is only the voltage I can't use the Offset mode to have this chip stable, or do anything under the 1.425v, that's the stable set of this chip, thats why I said its not a winner of the silicon lottery, because I dream of this chip do all the work with 1,3750v at 4200mhz but... No, this chip demands 1,4250v to be stable, as I said since August 2018 at this day same OC without any truble even with the BIOS 4602, the only thing change with this last Bios was the Ai Tweaker\Digi+VRM values, because this last Bios was something picky with the Line calibration under 120% and 350 of Frequency are unstable the Cinebench crashes but fixed and playing with the numbers I see the chip was stable and doing the same work and the same performance on this Bios...

can someone make instruction on how to downgrade bios? here or in pm? i can't use my computer it totaly unstable on latest bios

Aeratiel wrote:
can someone make instruction on how to downgrade bios? here or in pm? i can't use my computer it totaly unstable on latest bios


Try this:

https://www.overclock.net/forum/11-amd-motherboards/1640394-ryzen-bios-mods-how-update-bios-correctl...

just ignore the MOD flash part of the guide.

before you use this method, backup your boards UUID, S/N and MAC.
https://github.com/LongSoft/FD44Editor/issues/4

ty guyz, gona get back on 4207 today finaly