Asus ROG Strix X570-E Gaming Bios update?

[thomson1969]

Hi,

Does anybody knows when there will be a new bios for this motherboard Asus ROG Strix X570-E Gaming.
The latest one is dated 2019-07-05, an there is nothing about which AGESA its using.

[knt]

Latest beta BIOS 4403 seems to be working good for me again compared to the previous BIOS version under Windos 10, will need to test under Windows 11 as it seems to work differently even with the same BIOS version and drivers.

The only thing that doesn't work correclty in the BIOS is the motherboard RGB, when the PC is off the RGB will still stays on even when saved with off and stealth option, some how those settings never gets saved properly.

[Furkin_Cat]

bios 4021 is largely fine for me with occasional usb issues, all the latest bioses don't post every time , so has anybody tried the new beta bios on docp and 1.35v, i have no need to overclock just need a stable system with 32gb of 3200mhz memory

[herculesdesouza]

Before updating the bios (was in 4201) had scored in cinebench r20 7993 pts, updated to 4403 and got 7890 pts, installed windows 11 again and ran the cinebench and got 8105 pts.
I use a Ryzen 5900X, all Bios in default setting (AUTO).

[comfuzio13]

The latest bios is actually a very nice bios update 🙂
No more ftpm stuttering for me, with my 5900x i am all core -30 curve and it is absolutely stable 🙂

[knt]

comfuzio13 wrote:
The latest bios is actually a very nice bios update 🙂
No more ftpm stuttering for me, with my 5900x i am all core -30 curve and it is absolutely stable 🙂

Yes, have to agree as all the CPU cores are now boosting up to 4900MHz and the 2 best cores to 5000MHz.

Still cannot overclock using curve without random crashes, so will be leaving it on AUTO as that seems to give good results.

[Shenny]

comfuzio13 wrote:
The latest bios is actually a very nice bios update 🙂
No more ftpm stuttering for me, with my 5900x i am all core -30 curve and it is absolutely stable 🙂

From where do you set the curve - from the AMD Overclocking menu in BIOS or from the AI Tweaker --> PBO menu? Or from Ryzen Master? For me it became relatively complex where and what to set since 4204. 😄

[comfuzio13]

Shenny wrote:
From where do you set the curve - from the AMD Overclocking menu in BIOS or from the AI Tweaker --> PBO menu? Or from Ryzen Master? For me it became relatively complex where and what to set since 4204. 😄

Sorry for late reply!
I used the latest Ryzen Master, left it to do the per core tune for a few hours and it set them in the bios automatically.
Yesterday though I had my first WHEA error in 1 core, so I will have to test again that 1 core with -25 instead of -30

[Manckosy]

comfuzio13 wrote:
Sorry for late reply!
I used the latest Ryzen Master, left it to do the per core tune for a few hours and it set them in the bios automatically.
Yesterday though I had my first WHEA error in 1 core, so I will have to test again that 1 core with -25 instead of -30

Sounds nice! wanna share the values thas the ryzenmaster has setted for you?


@allavatar2
Since I use the fTPM under W10 for bitlocker, im very interessted in the new BIOS... but what about this EDC bug? i dont do classic OC, but i do undervolting (with manual EDC+TDC+PPT + negativeCurveOptimiser)... is this OC bug only when doing higher EDC? Or even when goning down with the EDC values?

G

[allavatar2]

Manckosy wrote:
Sounds nice! wanna share the values thas the ryzenmaster has setted for you?


@allavatar2
Since I use the fTPM under W10 for bitlocker, im very interessted in the new BIOS... but what about this EDC bug? i dont do classic OC, but i do undervolting (with manual EDC+TDC+PPT + negativeCurveOptimiser)... is this OC bug only when doing higher EDC? Or even when goning down with the EDC values?

G

in my opinion just highder then 140 values EDC new bios 140 EDC limit of manuel/PBO O.C. if give more values cpu voltage drop 1.425v max

[gabriel_knight]

Hi,

I have a AMD 3700x and every BIOS above 4021 (4204, 4403) does not boot with WIndows 11, but gives a BSOD when starting Windows 11
I also tried to do a complete clean reinstall.
During installation of WIndows 11 it reboots many times, more than normal (crashes).
Installation took al much longer time than with 4021.
Sometimes I come in Windows 11, but most of the times it does not even start and gives a BSOD (Samsung 970 EVO plus)

When I use 4021 BIOS I have no problems at all.

I have the audio stutter problem, so was hoping this BIOS would solve my problem.
Other people with the same experience?
I have no OC at all.