Asus Crosshair VI Hero Q-Code 8 / Not Starting

[nazzario]

Hi

I have a big Problem and i hope someone can help me.
Yesterday i have received all my components. Ryzen 1800x, 32 GB Ram, M.2 SSD, RX480 Graphic Card and Silent Loop 280.

I have installed all components and now the PC is not booting. I received the code 8. My Problem is i cannot goes into the bios because i have no Screen.
The RGB on the Boards is ok. The CPU-Ready is green but the onboards LED is off.
I have tried to remove the RAM, than just use 1 Ram /2/3/4 etc. I remove all other components, Graphics Card, SSD but still Code 8 and nothing working. I just not removed the CPU because it's a lot of work. And the Status is green so i think that will be ok.
I Flashback the bios to 0902 from the asus page and i think that installed sucessfully.

I don't know what i can do and i hope someone can help me.

Thanks and Regards
Nazzario

[Praz]

@ solomonshv

Moving forward do not post in a manner that requires the swear filter to be necessary. Also be respectful to other members when replying to their posts. 2 of your posts in this thread have been removed. Reposting them is fine as long as the posts are composed in a civilized manner.

[Eniotna]

Hi everyone,

Just to say, if someone still looks at this topic, that I solved this issue by puting a piece of paper between the motherboard and the gasket!

I'm using a EKWB Predator 360.