cancel
Showing results for 
Search instead for 
Did you mean: 

Asus B550 dram voltage not increase

smarty05
Level 7
I can not change DRAM voltage in the bios, when i set it to 1.35 volt - after restart it still stay on 1.2 v on BIOS. Perhaps is a Mainboard Bug.....my bios is up to date (2423). I can not get over 1.20 volt. DOCP not works.

:mad: Bios Flashback, clear cmos....reset battery, change ram, change psu....etc...nothing helps......
2,517 Views
4 REPLIES 4

Reous
Level 7
Hey, i think you are the same as in the hardwareluxx thread? I thought you have send back the board or is this already a second one?

I'm curious if someone can find a solution.

Reous wrote:
Hey, i think you are the same as in the hardwareluxx thread? I thought you have send back the board or is this already a second one?

I'm curious if someone can find a solution.


haven't got it yet....

RedSector73
Level 12
From the CPU, check you have the ram in slots 2 & 4 (A2 & B2).

Select DOCP like this
https://www.legitreviews.com/wp-content/uploads/2018/05/asus-x470-board-645x484.jpg

The solution is:

The motherboard is faulty and must be replaced with a new board.