Anyone manage to reach 3200mhz with Trident Z RGB F4-3200C16D-16GTZR?

[Daniel0303]

Im totally new in ram overclocking
hope to get some help here
my specs are:

Cpu ryzen 1700
Motherboard: CH6
Bios: 1403
Ram: Trident Z RGB F4-3200C16D-16GTZR

Anyone manage to reach 3200mhz with their Trident Z RGB F4-3200C16D-16GTZR? or higher than 2133?
If so please share your setting

Thank you

[Emmily]

I'm using 16 18 18 18 38 one. U don't have to setting anything just D.O.C.P. standard and only increase DRAM volt to 1.38 (Maybe C6H show u 1.40-41 don't panic) that'a all u should get 3200
If u really want to adjust the timing try 16 16 16 16 36 @3200 first.
good luck

[marblesrx7]

I'm using 1.40V which reads 1.439 in the monitor. Also had to use 1.5V Dram boot voltage with 1.1 Soc Voltage. I found that they are more stable @ 18 18 18 38 CR1. I was able to get then to run and boot without touching anything but they were not stable. I would get a crash around the 12-15min mark of prime95 and random boot failures. Hope that helps.

[rogghost]

[Krusnik]

I've got the 14 and was able to get to 3200mhz with the DOCP #1.

Bios 1401+

[Daniel0303]

Thanks guys, i manage to reach 3200 with docp

[marblesrx7]

Daniel0303 wrote:
Thanks guys, i manage to reach 3200 with docp

Good to hear. Enjoy!!

[Redjamax1]

Daniel0303 wrote:
Thanks guys, i manage to reach 3200 with docp

How'd you end up getting it. I can only hit 2933

Sent from my LGLS775 using Tapatalk

[danoz0r]

I have the same ram just the 32GB version (4 x 😎 i cant go over 2933 either.

[Daniel0303]

Just by enable D.O.C.P

but i had to choose between p state overclock or 3200mhz on the ram
pstate = 3066 on the ram or it wont boot up at all
Manual Oc no problem for both
OC to 3875mhz

Redjamax1 wrote:
How'd you end up getting it. I can only hit 2933

Sent from my LGLS775 using Tapatalk