Hi everyone, I purchased ROG RYUJIN III 360 ARGB that I installed on my RIG and with which I can control all the cooling speeds (Standard-Turbo and Max) and everything seems to work correctly.
As per the manual I connected the 4 PIN pump connector on the CPU Fan port of my motherboard and the 4 pin connector of the radiator fans on the SYS-FAN 1 port.
However, I noticed that even bringing the heatsink to maximum speed: The pump turns at maximum, the integrated fan of the heatsink turns at maximum...but the radiator fans connected to the SYS-FAN 1 port of the motherboard always remain at the same speed (1481 RPM) when on the technical sheet they indicate that they can reach 2000 RPM. Is all this normal? I was convinced that increasing the performance of the pump would also increase the radiator fans to cool it quickly. Can you help me understand if I connected everything correctly? Is it normal for the radiator fans to always go at the same speed? Many thanks to those who help me. Francesco
