Has anyone figured out how to get custom images to display on the oled on the ROG RYUO? I installed the latest version of livedash 1.5.3 firmware 0106 and when I upload a custom image, it is all blurry and shows the image overlapped like 7 times, eac...
Hey thereOverall, the safe liquid temperature for custom loops is up to 55°C, well, "safe". It's good to be in lower 30s. And max is 60°C. When playing Plague Tale Innocence, my CPU runs cores in higher 80s [86 - 88°C].My question is, will the Asus R...
I bought the 360. Installed the livedash software, everything was working OK, I say just OK as there were some bugs with the display. After a couple of days and trying to get the custom animated gif feature working (installed firmware update) I manag...
Hi guys, I tried update the firmware on my Win10 system and after all the process seems finished, I got "update fail". Now is cooler crazy noisy, the ROG logo is gone on top of pump, the AI Suite do not see anymore the ROG Ryujin.How to fix it or get...
Recently I just upgraded to ASUS ROG Ryujin 360 CPU Cooler. I am using Asus ROG Maximus X Hero with Intel Core i7 8700K. After installing the cooler perfectly, the stock CPU temperature shows 40 - 42 degree C without overclocking. But as I seen some ...
Hello @alli have done the setup with the ROG Ryujin 360.Using different Fans insteed of the Noctuna Industrial Fans. ( Thermaltek Riing RGB Plus Premium ) My problem is if i dont use the attached Fan adapter from the AOI Pump i can not make the inte...
The way I currently have the Ryuo 240 setup was due to the fact I could rotate the display 180 degrees. Well I have to do it every time I start the machine. The live dash software doesn't remember settings it looks like. Anyone figure this out yet...
I have my RYUO 240 connected to the CPU fan header (per the documentation). In AI Suite (latest version), adjusting the CPU fan speed does nothing. When choosing the RYUO fan, the pump speed is supposed to be adjusted but I think it's adjusting b...
So i have made a new system when using y cable the fans keep on 100% is there bios setting that i have overlooked because when using mother board cha fan it works with ai suite when going back to y cable fans start full speed
I'm building a mostly ROG gaming PC. Asus ROG Maximus X1 (wifi), Asus GeForce RTX 2070 ROG Strix OC 8 GB GDDR6, and an ASUS ROG RYUJIN 360 AIO Water Cooler. I want to do this right, but the case part is bothering me ( I haven't built a PC in 10 yea...
